Why does the computer sees the headphones? 4 ways: what to do if the laptop does not find headphones - FAQ from Earphones-Review🎧

Often it is necessary to watch a movie, listen to music on a PC or hold a conference in Skype. However, there may be a serious problem: The computer does not see the headphones On Windows 10 or 8. This is a common problem for all types of headphones, when users complain that they do not hear anything, even if the speaker works fine.

These and many other questions are constantly interested in users. And I will give answers below for them:

  • What if the laptop or computer does not see Windows 10, 8, 7 headphones?
  • Why does the computer sees stuck headphones?
  • What if the computer does not see the headphones with the microphone?
  • Why does PC or laptop sees Bluetooth headphones?

See also:  Rating TWS Nauchnikov

Fortunately, there are several ways to find out how to fix the headphones if the Windows 10 or laptop computer does not see them.

The computer does not see the headphones: what to do?

Below I led several ways to help eliminate the problem of discovery of headphones on a laptop and PC. Most likely, you will not need to experience every option. It is enough just to go in order until it turns out to discover the headset.

  1. Check the connection of the headphones
  2. Update Sound Driver
  3. Delete and reinstall the audio driver
  4. When using Realtek HD Audio Manager, disconnect detection

Solution 1: Check the headphone connection

If the headphones are disabled on a laptop or PC, it is logical that you cannot use them. Check the correctness of the work is very simple:

  1. Make sure the headset is correctly connected.
  2. Select "Sound" by pressing the right mouse button on the volume icon. The computer does not see the headphones
  3. Select the Playback tab. Laptop does not see headphones
  4. If the device is not displayed in the list of devices, right-click on the empty field - in front of "Show disabled devices" should be a check mark. After that, the headphones should appear in the list and become visible. Why doesn't computer sees headphones
  5. On the device that appears, right-click and click on "Turn off". Why the laptop does not see the headphones
  6. If you want to make your headphones an audio default device, click the Set Default button. What does the computer do not see the headphones
  7. On this, click OK and check if the computer sees the headphones.

See also:  Best headphones for computer

Solution 2: Update Sound Driver

Often, the old versions sound drivers can cause the laptop or computer does not see the headphones. That is why it is extremely important to be sure that the most fresher update is installed on the PC.

How to update the sound driver manually?

Go to the manufacturer's website and find the latest version of the driver for your headphones. However, it is important to choose exactly the driver that is compatible with the Bluetooth set of headsets and Windows 10, 8, 7.

How to update the sound driver automatically?

Automatic update is also possible using the Special DRIVER EASY service. Thanks to the program, you do not need to know the type and number of the device, worry that the wrong driver downloaded and the laptop does not see the headphones.

See also:  How to connect headphones to pc

What if the computer does not see the headphones?

  1. Download and install Driver Easy.
  2. Open Driver Easy and click "Scan". The program will analyze the PC and identify the malfunctions with the drivers. Computer does not find headphones
  3. Then select "Update" opposite the devices detected to automatically download the new version of the driver. Installation occurs also on its own. Updating headphone drivers
  4. Reload and make sure that your computer or laptop can detect headphones.

Solution 3: Delete and reinstall the audio driver

If the fault is caused by problems with updating an audio driver, you need to delete an audio driver via the device manager. After that, restart the laptop, and Windows will reinstall the audio driver for your device.

Why does the laptop sees the headphones?

  1. Click Windows simultaneously and R. The Run window will appear.
  2. Enter the devmgmt.msc command and press ENTER. This command calls the Device Manager. PC does not find headphones
  3. Select "Sound, Video and Game Controllers." What to do a laptop does not see the headphones
  4. Right-click and select "Delete Device". Remove driver for headphones
  5. Confirm deletion.
  6. Next, reboot the laptop, and Windows 10 will install an audio driver independently.

After all of the above actions, check whether the laptop is headphones.

See also:  How to connect headphones to mac

Solution 4: When using Realtek HD Audio Manager, disconnect detection

If the REALTEK HD Audio Manager is on the definition of the connector on the front panel, the laptop may not detect headphones. To disable connectors' detection on the front panel in Realtek HD Audio Manager, follow these steps:

  1. Right-click the Realtek HD Audio Manager icon on the taskbar and select Sound Manager. Computer does not see Bluetooth headphones
  2. Click on a small folder in the upper right corner. Realtek HD Audio Manager
  3. Install the "Disable Connector Detection on the front panel" and click OK.
  4. Check if your computer can now detect headphones.

See also:  How to connect headphones to PS4

I very much hope that my tips helped to solve the problem of Windows 10, when the computer does not see the headphones. If you know other options for solving a malfunction, write in the comments as step by step to resolve the discovery of the headset on the laptop.

Summary

Why does the computer sees the headphones? 4 ways: what to do if the laptop does not find headphones - FAQ from Earphones-Review🎧

Article Name.

Why does the computer sees the headphones? 4 ways: what to do if the laptop does not find headphones - FAQ from Earphones-Review🎧

Description.

The computer does not see the headphones? 🎧 The article describes 4 ways to solve the problem and answers to the question "Why doesn't a computer sees headphones?". Also in the article, I told step by step what to do if the laptop did not find headphones. FAQ from Earphones-Review - Help and Tips! ✔ ✔ ✔ Ticketing ✔ ✔ ossetters

Author

Alexander Ustinenenko

Publisher Name.

Earphones-Review.ru.

Publisher logo

Earphones-Review.ru.

The main causes of problems

Computers - multitasking machines. And from time to time they may fail, their components are able to break or damage. Each user should know why the computer does not see the headphones.

Do headphones are determined or not

Here are the most common causes of this phenomenon:

  • Incorrect connection to the PC;
  • Forgot to include bluetooth;
  • The headset was out of order;
  • There are damage to the connection cable or connector;
  • The headset is incompatible with the OS or any other components of the PC;
  • There are no or damaged / equipped equipment drivers;
  • There are viruses and spies on the computer;
  • The system registry is filled.

This is not a complete list of reasons why users encounter a non-working headset. Simply these options for developing events are very often found.

The computer does not see wireless headphones

Does the computer sees bluetooth headphones? And the wired headset also fails to connect? Then you should look for the problem in the computer. It is possible that the whole case is in the absence or damage of equipment drivers. To correct the situation, it is recommended to act like this:

  1. Go to the site of the manufacturer of headphones, after connecting to the network.
  2. Choose a headset model with problems.
  3. Specify the used version of the OS.
  4. Download drivers. This process takes out a few minutes.
  5. Start the "Installation Wizard". It is recommended to close all programs and browsers.
  6. Follow the instructions on the screen to complete the operation.

This instruction is also suitable for outdated drivers, and for damaged, and for completely absent in the system.

Important: You can update the hardware drivers via the Windows Update Wizard.

Panel on PC

The computer does not see the headphones on the front panel? Usually this problem is found at the owners of stationary cars. Such a situation often occurs due to the fact that the front panel is simply not connected. It is best to connect the headset to the rear panel with connectors. Experienced users can simply disassemble the system unit and set the jumper on the motherboard into a suitable position. This action will help connect the front panel with connectors for comfortable work.

Checking headphones, connecting and audio access to PC

There are several points that need to be checked first.

  1. Check your headphones on another device. Surely you have a mobile phone, a tablet, a laptop, another computer, or even a TV. We need to make sure that the headphones are workers.

    Checking headphonesIf you do not work, then most likely the headphones are broken. If you work, we are looking for the reason in the computer.

  2. Very often on headphones (on the wire) there is a special console on which you can adjust the volume. Check if the volume is completely twisted there, so there is no sound.

    No sound on headphones connected to PC

  3. Make sure you correctly connected headphones. If there is no sound when connected to the output on the front of the computer, then try connecting them to the output on the rear panel. Instead of speakers. Usually, this audio output is painted in green (salad) color.

    Connecting headphones to the back and front panel of the computerIf there is no sound when connected to the rear panel, and from the front - no, it means you need to be checked if the front output to the headphones inside the system unit is connected. About this below in the article.

  4. Perhaps on the computer is simply the volume is completely removed, so there is no sound from headphones. Check this by clicking on the Windows Sound icon (in the lower right corner). And in the application through which the sound is reproduced. It may be some kind of player, browser, games, etc. There may be your volume settings.

Many people do not see the headphones only when connecting to the front panel (so much more convenient). The problem may be that this output is simply not connected to the motherboard. You can check. But you have to open the system unit.

First I recommend checking everything in a strand with sound settings and drivers in Windows. Read more about this on the example of Windows 10 and Windows 7 below in this article. And after that, open the system unit.

Viruses

The computer does not see the headphones? Maybe all thing in viruses. They can lead to the output of the connected equipment. This is a very common phenomenon.

What to do? Recommended:

  1. Close all active programs.
  2. Open any antivirus.
  3. Select all the hard disk sections and make a deep check.
  4. Potentially hazardous objects.
  5. Place the files and remove potential threats for PCs in Quarantine.
  6. To restart a computer.

Now everything should earn. Users are recommended to reinstall drivers before the next attempt to connect the headset.

Update sound driver

If none of the specified methods work, try removing the current driver and replace it with a new one.

Open the system search string, type "Device Manager" and click the result.

Deploy "Sound, Game and Video Controllers." On the right mouse click on the sound hardware, open the context menu and go to "Update Drivers". Select the option automatically search for updated drivers.

️ Driver update using Iobit Driver Booster:

Laptop does not see Windows 10 headphonesSelect the installation of drivers Earphones are not connected to Windows laptopWe allocate only the necessary Headphones are not connected to laptopRun the process Headphones do not work on a laptopFirst drivers download Windows 10 does not see headphonesThen installed Installation of driversFinishing installation

We update the driver. Method 2

If the automatic method of the driver for some reason was not installed, you can set them manually. This is done like this:

Step 1. To download the file with the drivers, we turn to the official website of the RealTek sound card manufacturer. (Realtek.com)

Open the official website of the RealTek sound card manufacturer

Step 2. Open the menu with the sections of the site by clicking on the icon with three horizontal strips, which is in the upper left corner. Here you need to select the "Downloads" tab, and then go to the COMPUTER PERIPHERAL ICS item.

Select the "Downloads" tab and go to the COMPUTER PERIPHERAL ICS item

Step 3. Opposite the "PRODUCK LINE" text you need to select a category with drivers for a sound card. Therefore, select "PC Audio Codecs". After that, select the partition whose name matches your sound card.

Choose a section that matches your sound card

Step 4. Find a version of the driver in which your operating system support is present. After that, click on the blue icon to the left of the description you need. Select the version of the driver in which your OS support is present.

Step 5. On the page that opens, you need to agree with the installation conditions, putting a check mark on the text "I Accept to the Above." Slightly below, enter the address of your email in the "Email" field to which the link to download the archive with the drivers will be sent. We enter the address of your email in the "Email" field to which the link will be sent to download the archive with drivers

Step 6. Enter the captcha, and then the installation will begin. When the file is downloaded, unpack it and install as the usual program.

Step 7. After completing the installation of the drivers, reboot your system.

Removing the Realtek HD Audio audio controller

If the headphones are not displayed in the audio devices, try removing the Realtek HD Audio Manager. Despite the fact that the program is very convenient to use, sometimes causes problems. If, after deleting the sound started playing, try installing the dispatcher again and check their performance.

Dial in the Windows Control Panel search bar and go to the result found.

Switch viewing mode to "Categories" and select the "Programs" section.

Find the Realtek HD Audio Driver program and after clicking on it right-click on it, select "Delete". Follow the instructions for its uninstallation.

After the process is completed, restart the computer and check whether the headphones are displayed in playback devices. In case of a successful outcome, try reinstalling the program.

Configuring headphone jacks in Windows Control Panel

This is the easiest reason why the laptop does not see the headphones. The connector can be simply disabled in the operating system control panel. To correct the problem:

  1. Go to the computer control panel.
  2. Go to the "Sound" section.
  3. Go to the "Playback" tab.
  4. Find the "Dynamics" rubric and activate the section (Figure 5).

If it does not work, perhaps the reason lies in the audio driver.

Configuring headphone jacks in Windows Control PanelFigure 5. Headphone settings window in Windows Control Panel

Disabling the integration of input sockets of one type (if applicable)

The problem with the "invisible" headphones can be in how exactly from the company Realtek controls the input jacks on your computer. If this applies to your PC, try to make this:

  • Press WIN + S to trigger the search string;
  • Push the request "Realtek Audio Console" and select the result found;
  • Go to the "Advanced Device Settings" tab;
  • In the Record Device section, check the box near the "Separate all input jacks as independent input devices";
  • Close the Realtek Console window and restart the computer.

Go to Windows and check if your system has connected headphones or not.

The computer does not see the headphones stuck in the connector

First you make sure that you correctly connected the device to the device. Very often the problem appears at this stage.

IMPORTANT! Please note that ordinary headphones have two round plug of different colors - green and red. It is important to understand that they are connected to different ports. It is quite difficult to confuse them, because next to each entrance is a small drawing, with which it is easy to understand, for which it is intended, and sometimes the sockets even color the same color as the desired plug. But still you should be careful and check again, whether you all inserted everything.

Severe for headphones

If you have a headset with a USB port, then your serviceability should be tested. Each computer has some kind of inputs somewhat - try insert the plug into another connector. If everything goes, then, most likely, the port broke. It is quite difficult to fix it at home, so just swipe the entrance and use others. If the nest is not enough, you can buy a special adapter. Wireless devices can also be connected using a USB cable. Therefore, if the computer does not see the headphones via Bluetooth, be sure to try this method.

Mechanical damage and malfunction

Then it is worth checking all the equipment involved for damage and faults. The computer does not see the headphones?

It's time to do the following:

  1. Carefully examine connectors connecting to PCs. If the nests were actively used earlier, they may be damaged.
  2. Check the wiring of the headset (if available) for damage. The cable can be very shifted or completely torn.
  3. Examine the integrity of Bluetooth adapters on a computer and headset.

If damage is discovered, you can act like this:

  1. Connect the headset to a whole connector. This advice is perfect for USB headphones.
  2. Attribute a computer and headset to the service center. It will fix the equipment there and lead it into the working condition.
  3. Buy new equipment. This also applies to PCs and headsets. It all depends on where the damage was discovered.

Important: Independent repair of headphones, speakers, wires, cables, connectors and a computer as a whole are not recommended.

Changing Windows Settings

One of the reasons why the headphones connected to the front panel do not work, there may be incorrectly set up the Windows settings, in particular, shutdown in the parameters of the specified type of devices.

    1. Click the right mouse button (PCM) on the volume icon in the notification area. It is represented in the form of a pictogram in the form of a speaker. From the menu that appears, select "Playback Devices".

Switch to the playback device window through the context menu from the notification area in Windows 7

    1. The "Sound" window opens. If you do not see the element in the "Playback" tab, which is called "headphones" or "Headphone", then click on an empty place in the current window and select the "Show disabled devices" option. If it is still displayed, then skip this step.

Enabling Disabled Disconnects through the context menu in the Windows window playback tab in Windows 7

    1. After the above element appeared, click on it by PCM and select the option "Enable".

Turning on the speakers through the context menu in the Windows window playback tab in Windows 7

  1. After that, near the element "Headphone" or "headphones" should appear tick, inscribed in the green circle. This suggests that the device should work correctly.

Headphones are included in the Windows window playback tab in Windows 7

Sources

  • https://headphonesbest.ru/faq/pocchemu-kompyuter-ne-vidit-naushniki-442
  • https://fb.ru/article/387950/komp-ne-vidit-naushniki-chto-delat.
  • https://prostocomp.net/sistema/ne-rabotayut-naushniki-na-kompyutere-pochemu-ne-idet-zvuk-na-naushniki.html
  • https://compuals.ru/ustranenie-nepoladok/naushniki-ne-otobrazhayutsya-v-ustrojstvah-vosproizvedeniya
  • https://protechniky.ru/cifrovaya/naushniki/kompyuter-ne-vidit-naushniki-kak-eto-ispravit
  • https://soft-ok.net/5020-kompyuter-ne-vidit-naushniki.html
  • https://gamesqa.ru/kompyutery/kompyuter-ne-vidit-naushniki-17347/
  • https://lumpics.ru/headphones-dom-not-work-on-a-computer-with-windows-7/
  1. Why doesn't the computer sees Windows headphones
  2. Check the parameters of the physical connection
  3. Enabling input socket separation option
  4. Enabling multi-threaded mode
  5. Drivers
  6. Driver updates often solves the problem when a laptop or computer does not see the headphones.
  7. Driver Update with Iobit Driver Booster:
  8. PC does not detect headphones
  9. Setup headphones
  10. One wired headset does not work
  11. Mechanical Damage Check
  12. Switch the headphone audio device manually
  13. Disable connector detection on the front panel
  14. Another audio format
  15. Causes of lack of sound in headphones
  16. Determine the cause of breakage
  17. Faulty headphones
  18. Headphones do not work when connected to the front panel of the computer
  19. Diagnostics breakdown
  20. Repair of cable
  21. It is necessary to check the connectors
  22. What to do if the computer does not see the headphones
  23. Scanning for viruses
  24. Diagnostics and automatic troubleshooting
  25. Scanning for viruses
  26. Driver checking (update)
  27. First method: Check for updating audio driver.
  28. Third way: Remove the latest headphone driver
  29. Possible reasons:
  30. "First aid
  31. "Cunning" connectors in new laptops / PC
  32. Technical breakdown of headphones / audio card
  33. Sound Driver (Headphones): Search and Installation
  34. Lack of audio drivers
  35. Sound is disabled in the BIOS settings
  36. Useful tips:
  37. Checking headphones multimeter
  38. What to do if wheezing, creak, fountain headphones
  39. Elimination of hardware breakdowns
  40. Eliminate errors using the "Troubleshooting Sound" tool
  41. Configuring headphones in Windows 10 and troubleshooting tool
  42. Options and tools
  43. Other possible reasons
  44. Incompatibility with a combo connector on new laptops and PCs
  45. The system did not correctly identified the audio device.
  46. Missing or incorrectly installed driver
  47. Removal of the virus
  48. Viruses
  49. We carry out diagnostics
  50. How to connect wireless bluetooth headphones to laptop - instruction + video
  51. Why doesn't the laptop sees Bluetooth headphones?
  52. Consider in more detail what to do if the laptop does not connect to Bluetooth headphones:
  53. Why doesn't PC sees Bluetooth headset
  54. How to set up a headset in Windows 7
  55. Malfunctions depending on the version of the OS
  56. Sound is disabled in the BIOS settings
  57. System settings
  58. Driver update from developer site
  59. Lack of audio producers
  60. Configuring audio driver
  61. Use Realtek HD Manager to Configure
  62. Customize headphone inputs in RealTek utility
  63. How to configure
  64. How to connect wired headphones to a laptop on Windows 7, 8, 10
  65. Headphones do not work in Windows 10
  66. Physical malfunctions
  67. Connect errors
  68. Setting up headphones in Windows 7
  69. Windows 7.
  70. Windows 7.
  71. How to check the inputs for headphones
  72. Front Panel Connectors Connectors in BIOS
  73. Sound is disabled in BIOS
  74. Headphones are not displayed in reproduction devices.
  75. System Restore
  76. Rollback of the operating system
  77. Built-in diagnostics of the operating system
  78. Additionally
  79. User reviews
  80. conclusions
  81. Work with drivers
  82. No sound in headphones what to do
  83. How to disassemble and repair broken headphones
  84. Pluchem repair

Why doesn't the computer sees Windows headphones

First of all, it is necessary to establish the cause of the problem, which can be quite a lot. There are problems at the level of the operating system, mechanical damage or waste of contacts. In any case, you should know what exactly led to the emergence of a malfunction with which I had to face.

In addition, the model, as well as their type, is important. Currently, there is a huge number of various options, each of which has its advantages and disadvantages.

These devices are divided into wired, USB and wireless models.

  1. In the first case, the connection will occur using a special plug characteristic of the headphone that is called Jack.
  2. USB accessories are more universal - they are easy to connect due to the fact that there is a USB port on almost every household appliance. And this means that you can always enjoy your favorite music in magnificent quality and will not interfer others.
  3. Wireless models get widespread, but appeared more recently. They are connected using the Bluetooth function, which is also on the set of other devices. The lack of excess wires allows the user to be more mobile and move along with the headphones and the device to which they are connected. In addition, this greatly simplifies the process of setting the connection - you just need to press multiple buttons, after which the device will be ready to use.

But, unfortunately, even the owners of the most modern and expensive devices may encounter any problems. One of them is that in some cases the PC simply does not display headphones, as if they were not connected.

Consider the main reasons for which it can occur.

  • Perhaps the connection was made incorrectly. In this case, it is not necessary to expect from devices of correct work.
  • The bluetooth function is disabled - it must be connected both on headphones and on the computer. Sometimes scattered users forget activate the function.
  • Breakdowns in the headphones themselves / headset.
  • Open or other problems associated with wires.
  • Incompatibility of devices.
  • Problems with drivers - either they do not fit your computer model, or too long ago not updated. And in that, and in another situation, headphones will not work.
  • The presence of viruses in the PC system.
  • Overflow of the system registry.

This is not all but the most frequent causes of connection problems. What to do and how to determine the problem?

Check the parameters of the physical connection

First, make sure that you are:

  • Use the correct connector. The computer's socket you need is indicated by icon with headphones or green;
  • Included volume (on zero sound audio equipment will keep silence under any circumstances);
  • Use a laptop with a serviceable audio card (if the computer does not lose music even through the columns, then the problem is clearly not in specific equipment).
  • It is worth checking other headphones. They may be tritely broken, so we first need to make sure that the problem is not in this.
  • If you have a wireless bluetooth headphones, then the problem may be in the Mollar Bluetooth fault, or in a banal shutdown. Try, go to Control Panel Network and Shared Access Control Center Change adapter settings . If the module is disabled, then activate it. As a rule, a separate application is responsible for it.

Enabling input socket separation option

The problem often arises due to the method by which the RealTek software controls the sockets. In this case, try to enable the partition option for the front panel. This method is applicable only when using the Realtek HD Manager to control sound streams.

Open the command control panel Control running from the "Run" window (Win + R).

Switch viewing in the upper right corner to the category and go to the Equipment and Sound section. Then open the Realtek HD Manager.

Open Advanced Settings. Check the option "Separate all input jacks as independent input devices" and click on "OK" to apply changes.

If you use the old version of the dispatcher, go to the connector settings and check the box associated with disconnecting the definition of the sockets on the front panel.

After rebooting the system, connect the headphones and see if their computer sees.

Enabling multi-threaded mode

Sometimes the problem can be solved by turning on the multithreading mode in the RealTek HD controller settings. This method is applicable for versions in which this feature is present.

Open the command control panel Control From the command interpreter Win + R.

Go to the hardware section and sound - Realtek HD Manager. Then, in the upper right corner, click on Additional Settings and check the Multi-Throw Mode option.

After restarting the computer, Windows should see the headphones.

Drivers

If the sound does not appear, then everything is possible because of the drivers on this computer. Check if they are installed at all and everything is in order. To perform this task it is necessary:

  • Press the right mouse button on the computer icon by selecting "Properties" .
  • Select item "Device Manager" .

In the column " Audio inputs and audio outputs »Denote driver you need. If you see a yellow exclamation mark there: the program does not work, or is not installed at all.

Driver updates often solves the problem when a laptop or computer does not see the headphones.

The simplest method: right-click on the desired device, in the Update Driver menu.

Updating Drivers for Sound .

  1. You can update the driver by downloading it from the official site of the audio card manufacturer , or through the program to update drivers.
  2. If you have a RealTek chip (standard sound card, built into the motherboard), then new versions of the drivers can be downloaded here. If the manufacturer of the audio card is different, download from its site. Downloads, installed, rebooted PCs - everything is usually.
  3. There are interesting programs for automatic driver updating. For example, Iobit Driver Booster. We establish the program, and then through it - the necessary drivers (sound, at a minimum).

Driver Update with Iobit Driver Booster:

PC does not detect headphones

If the computer does not see the headset after all the manipulations made - it may have happened a physical breakdown. Might be broken:

  1. Plug - It is recommended to check the headphones by connecting them to another device. If the wired headset works with the same smartphone, look for a malfunction in another.
  2. Audio connector - Check how it detects and reproduces sound for other devices. If there is no contact with other playback sources, it is recommended to replace the connector or overpass.
  3. USB connector - When pairing headphones with a USB output, check the pairing through other ports and connecting another peripheral with the "Problem Port".
  4. Sound card - if it burned, no of the connectors did not work, plus the dispatcher would tell you about it.
  5. Wire or speakers - if the cable in wired headphones broke, or the speakers are damaged - contact the service center for their fixing. You can define such a breakdown by checking the headset on another device.

Setup headphones

The laptop may not see audio equipment due to the internal settings of Windows. Personally, I use Windows 10, but for version 7 and 8 it is also relevant. To solve this problem, it is necessary:

  • Open " Control Panel
  • Click on the inscription " Equipment and sound
  • Go to section " Sound
  • Select icon with headphones and click on the "button" Set by default "

There are still no sound in the headphones. We look further.

One wired headset does not work

If one earpiece suddenly stopped working, you can likely correct it yourself, the main thing is to find the cause.

Mechanical Damage Check

Depending on the type of problem, the disappearance of the sound is determined by the sequence of actions to solve it. Before carefully inspect the headset and connectors to connect it in the computer. Try to use columns or other headphones. If the sound in them is also absent, the problem may be associated with the sound card. It is solved by contacting the service center, where they are usually diagnosed:

  • Mechanical breakdowns
  • Malfunctions of radio elements,
  • bad contact (if the map is unintegrated),
  • Nutrition output connections.
Output from the situation when the built-in sound module "burned" may be USB audio card

However, with a neat handling of a PC system unit or a laptop, this happens too often. The headphones themselves are much more often breaking. If the headset does not work when connecting to obviously good equipment, check them. The most frequent breakdowns of headphones:

  • breaking, short circuit of cable wires;
  • plug;
  • Malfunction of speakers.

If the last paragraph means almost the sentence of the headset (the membrane breakthrough or the burnt coil of the microfer is not subject to repair, and the replacement of the speakers is complex due to the absence or high cost of similar elements), then with other faults you can cope, sometimes even on your own. For this:

  1. Check the integrity of the headphones. If there is a tester ring them relative to the overall contact, located at the base of the plug (resistance should be 16 - 36 ohms). Special attention in visual inspection, pay for problem areas, the cable is incredibly transmitted in them.
    Specialists say that in 70-80 percent cases, the cable breaks down near the plug
  2. When breaking the wires near the plug, you will need a collapsible mini jack. Cut the cable for 3-5 cm from the native connector, clean and solder the veins to the collapsible plug. Usually green (sometimes blue) wires goes on a common contact; Red and black (white) should be spilled through the channels.
    Mini Jack with a diameter of 3.5 mm or 1/8 inches used in smartphones, players, PC audio cards

Describe the process of replacing the cable due to the huge number of models and types of headsets within one article is very problematic. However, detailed instructions on the complete replacement of the collapsible headphone cable can be found on the Internet on the relevant forums.

Switch the headphone audio device manually

When you connected headphones, they did not switch automatically, and in this situation you need to manually set the output of the headphones. To do this, open " Parameters »>" System »>" Sound »> Right" Sound device management "And in the column" Output devices »See if your headphone model is disabled.

Now go back to step back in the parameters, and in the column " Output »Sound, select your audio driver. If you do not know, you can switch the parameters in turn until the sound in the headphones appears. For example, I have headphones output via the Realtek driver "speakers", but may be an instruction of a USB port or other if Reatek is not installed in the system.

If there are problems with the microphone, then below will be the "input" of the sound. Do also the same, only to enter sound.

Disable connector detection on the front panel

If Windows 10 does not see the headphones, then you need to turn off the auto definition of the jacks in the RealTek program, open the Realtek HD Audio Manager and select the Checkbox. Disable front panel socket definition ".

Another audio format

If the headphones still do not work in Windows 10, then you can change the format of audio (Hz). Open " Control Panel "Writing this word in the search and select" Equipment and sound ". In the tab " Reproduction »Highlight the device that is default and is responsible for the headphone output, and then click on the" button " Properties ". In a new window, go to the "Advanced" tab and in the default format column, change the hertz while the headphones do not earn, pressing "OK" and "Check".

Causes of lack of sound in headphones

The reason for the lack of sound in the headphones on the laptop can be in:

  • mechanical damage to the cable;
  • hardware component malfunctions;
  • incorrectly working components of the operating system.

Often, it is possible to correct the situation independently, by making changes to the system parameters.

Determine the cause of breakage

Headphones are a rather fragile headset. It is not necessary if one speaker fails to immediately proceed to the disassembly. To repair the product you need to reveal the cause of the breakdown.

If the headset did not get into the water, fire or under a strong blow, the problem is looking for in three places:

  • Missing drivers on a laptop, computer and other electronic device. For this reason, one or two speakers may not work, as well as distinguish sound.
  • Cut wire. This happens in places of frequent beggars or from a sharp jerk. In the cheap Chinese models, the poor-quality wire "Running" without good reasons.
  • A crack appeared on the dynamics membrane. This reason is considered the first if the headphones dropped to the floor or hit the solid object.

When the reason for the breakdown is detected, proceed to its elimination.

Recommendations: If the water fell on the headphones or inside the mobile phone connector , How to independently fix headphones, if one stopped working , Repair of headphones do it yourself

Faulty headphones

The most common reason why the laptop may not see the headphones are their malfunction. Check the headphones can be several steps.

  1. Turn off all devices that can play sound. These are headphones, columns. Turn on any music / video. It is important to make sure that the laptop is able to reproduce the melody and the problem is not here. If you do not hear, check if the sound is added and make sure that the audio is heard. When the sound appeared, proceed by further steps, otherwise, look for reason in the other.
  2. At the second stage, connect the columns, turn on the audio. It is necessary to make sure that the laptop recognizes the playback devices. If no sound, check the selection settings of the reproducing accessory.
  3. If on the first one, the second stage everything went well, then connect other headphones, look if they work. If yes, then the breakdown is due to a faulty accessory. If the sound does not even appear, and you are sure that these headphones are good, check the presence of drivers for audio devices.

Ideally, you need to connect the same device to another laptop or computer with the same operating system, necessarily the same version. After that, it will not be superfluous to check the connector itself.

Headphones do not work when connected to the front panel of the computer

It would be nice to make sure that this special access to headphones, which can be detected somewhere on the front, or the top panel of the system unit is generally connected to the motherboard, and is connected correctly. It is not rare, even in the process of assembly, or some repair, these outputs simply do not connect, or are connected incorrectly.

I'll show you on the example of your computer. For the output of sound (and microphone) on the front panel, this plug with the inscription is responsible. Audio. :

I have it connects to the port, which is signed as Jaud1 .

I checked on a new computer with a modern motherboard. There is almost all the same. The connector is called Jaud1 , only on the plug is written HD Audio. .

Some more information on this topic can be found in the article Connecting the front panel of the computer .

Diagnostics breakdown

It is easy to understand that the headphones broke, very simple - from the speakers just ceases to go sound. If this happened with your headphones, the problem can be in one of the components of any headphones:

  • Could break the speakers;
  • The problem with the cable is a gap, wipe insulation;
  • Motes with a plug - the most common problem, due to which the signal does not pass from the sound source to headphones.
3.5mm MINI-JACK headphone plug

Diagnose broken headphones will have to be in several stages:

  1. Connect the headphones to any suitable sound source, run the music file and bend the cable in different places. If at one moment the sound will appear, then the problem is in the wire.
  2. Stir the plug - the problem may be that contacts simply move in this place. Help can like a stitch movement in the nest - indulgence, weakening or tapping and movement of the wire with respect to the plug. If the sound appears, a mini-jack will have to solder.
  3. Take other headphones. First, it will help to exclude a breakdown of a particular sound source. Secondly, you can turn off the wires from broken headphones, if possible, and connect to the workers - it will become clear that the speakers do not work.
  4. If the headphones do not disconnect the wires, you can check the device multimeter.

Repair of cable

First of all, it is necessary to localize the location of the wire breakdown by which there is a signal from the sound source to the speakers. The easiest way to do is using a multimeter or visually - if the cable was damaged mechanically, everything is very obvious. If there is no multimeter, and the cable is intact, it is possible to find the place of breakage, burning wire on different sections. Where the sound will appear after the inflection, and there will be a breakdown.

If the sound appears when you start bending the cable at the site of its connection with the plug, the plug itself will have to refine.

Twist two wires

If the breakage is on the cable itself, it is possible to fix it, just cutting and restoring the integrity of the wiring. It is possible to do this in particular - the operation is quite simple, but that the result is accurate and more or less durable, you must follow the instructions:

  1. Find the insulation of the wire in the verge of breakdowns. You can make it with special laying or ordinary stationery knife. Under the braid, it will be possible to find three wires - two isolated transmitting acoustic signal, and bare - grounding.
  2. Cut the wire in half and remove the insulation from about an approximately one and a half centimeters. It is necessary to do this in such a way that the edges of the wires have the same length.
  3. The bare wires of the same color are twisted by any convenient way - spiral or linearly. In any case, it will be a reliable connection, but in the second case it will be less cumbersome. However, it takes experience.
  4. It is advisable to additionally strengthen the cleaner to additionally - a slight solder is dripped onto the connection with a soldering iron. At the same time, the transparent protection of the wires is melted - the pairs do not stand.
  5. Wires are insulated with insulating ribbon separately. If channels and grounding are in contact, the sound will constantly fill with interference and distortion.
  6. From above, one more layer is wound with a tape or a shrink tape is put on, which is then heated with a hairdryer and is tightly dragging, making it easier. The result is extremely neat.

Consider that the copper wires used in the headphones are very thin, so it will have to work with them very carefully so as not to damage even stronger.

It is necessary to check the connectors

It happens that the sound is not reproduced due to the physical impact on the headphones or the computer connector. Check simply: the headset is connected to the phone. If there is sound - with headphones, everything is in order, and the fault lies in the computer.

What to do if the computer does not see the headphones

If your computer does not see the device, you should conduct high-quality diagnostics and not only to identify the cause of the fault, but also take the right actions to eliminate it.

It is not necessary to seek expertise for experts, you can easily cope with yourself if you spend some time and effort.

Scanning for viruses

No matter how strangely sounded, but the villain viruses can also play a role in the problem of connecting headphones. Therefore, as an option, ride the system for viruses. To do this, you can use either you have antivirus installed. And if you do not want to install anything (what I do not recommend you), then go on a computer at least one of free attending utilities , for example Drweb Cure IT.

Diagnostics and automatic troubleshooting

If the headphones and the card are good, and the sound is still absent, you should check the source at the program level, and above all:

  • correct connection,
  • settings
  • The presence and relevance of the drivers.

Sometimes for this you do not need to dig in the sound card settings. If you see the speaker icon in the system tray with a warning symbol, it means that something is not in order. By the way, the same symbol is observed when the wire breaks or the missing connection, because the PC is simply determined by the headset.

In Windows 10, this symbol means a malfunction with sound

Further user actions, as a rule, correspond to the following instructions:

  1. Click on the left mouse button on the speaker's speaker icon. The system will start an automatic problem detection.
    The system scans and identifs problems in automatic mode.
  2. At the next stage, Windows 10 will offer to choose, what source malfunctions should be revealed and eliminated. We choose the "headphones", click "Next".
    In the system unit, the headphone connector is located in front
  3. Within a few seconds (sometimes minutes) the automatic program will operate. At this time, I do not turn off and do not click.
    Scanning equipment configuration and troubleshooting can be canceled at any time.
  4. For some reason, Windows 10, for some reason, considers a malfunction (in this case) the low volume of the audio device. Open the mixer.
    This item can be skipped
  5. Check the levels of the sound mixer, close this window and click "Next".
    Warning symbol on the speaker icon means that the channel is disabled
  6. After a few more seconds, the diagnosis is completed. We leave from the means of diagnosis and reboot the device.
    Additional information contains detailed information on identified and corrected failures.

Scanning for viruses

Anti-virus software can help the headset. The computer virus violates the system - this affects the functioning of the microphone, column and any other audio device.

It should be noted that the malicious code may not be determined in the system due to the fact that the user has not been updated for a long time " Windows Defender " Alternatively, it is recommended to use anti-virus software from a third-party developer or correct the problem will help Dr.Web Cureit scanner!

Driver checking (update)

First, determine which state is the sound playback device. Can drivers are not installed or PC simply sees the device. For this:

  1. In Windows 7, open the "Start" and go to the control panel.
  2. Next click "System and Security" - "Device Manager".
  3. In Windows 10, you can get into the Device Manager through the menu call the right click on the "Start" menu.
  4. Expand the "Audio input and audio outputs" item and click on the "Dynamics" row, which belongs to headphones. Click PCM and click "Update the Device".

  1. You can tighten it automatically (through the Microsoft driver database) or manually, downloading in advance from the official source.
  2. After installation, let a computer on a reboot.

You can do without device manager, using third-party software for finding and installing sound drivers. For example, Iobit Driver Booster or DRIVERPACK Solution. Only install programs from official sites, links to which you can see Wikipedia.

First method: Check for updating audio driver.

Right-click "Start", and when the list appears, click Device Manager. Find the "Sound, Video and Game Controllers" section and find and open your Audio Manager in the menu (for example, via HD Audio) and, by right-clicking on it, run "Update Driver". In the next window, click "Automatic Search for Update Driver Software" and wait to see if a new driver is available if not, consider other solutions.

Third way: Remove the latest headphone driver

In contrast to the first way, perhaps the problem is in the newest driver. Then you must try to roll back the driver. Right-click Press the "Volume" button and select "Playback Devices". Click on the "Headphones" button and open the "Properties" in the "Controller Information" section, on the Driver tab, select "Run the driver".

After you have passed all these paths, the problem, we hope will be solved.

Possible reasons:

Starting with visual device verification. Include how correctly the plug is inserted into the device connector. Contacts on connectors are made in the form of rings. If the plug is incorrect, then one of the rings will not touch the contact, respectively, one of the speakers will not work. The dynamics membrane takes place, as a rule, on those models where they are not closed by a protective body. The headsets can become an incorrect installation of a driver that provides the operation of the device. This problem is most often occurring when using equipment with a computer. The problem is eliminated by reinstalling the required driver, which is included in the purchase of the device. If there is 1 earphone, it can happen due to the connecting cable break. Source, garbage, dust can also be the cause of its breakdown or bad sound supply.

"First aid

And so, the first thing that advise is to carefully inspect the audio connector and the plug from the headphones. Whether garbage is on them: dust, crumbs, etc.

Also note the condition of the cable near the plug: in this place it is often driving and comes in disrepair (inside copper veins can be interrupted).

With a plug from headphones is all right

Next, make sure that the plug is inserted completely into the connector - to the end! (In my example below - the plug is inserted only "half", and therefore there is no sound in one of the headphones).

The plug must be put to the end into the connector

By the way, if you have no sound in both headphones (or one of them periodically: it works, then no) - Carefully inspect the cable: if it is almost noticeable "beggars / supervisors" (as it looks like in practice - see photo below).

If you have a soldering experience, then the "such" places can be easily fixed on your own.

Headphone cable was interrupted

"Cunning" connectors in new laptops / PC

Further, what to pay attention to (as told above) - at that time that many users are confused headset Connectors S. Classical . It is easy to distinguish them:

  • The headphone icon with a microphone is drawn on the headset, and he is alone;
  • The classic audio connectors are two: on the contrary, the headphones are drawn, opposite the other - the microphone (see the photo below).

Audio connectors on laptops (headroom and classic)

Also pay attention to the plug from the headphones: a plug will be a plug with 4 contacts (on the usual, as a rule, 2 plug and on each of them 3 contacts). The difference is shown in the photo below.

Plugs from different headphones

Important!

If you have a headset and classic headphones (or vice versa), then you need to use Special adapters ! Without adapters - the presence of sound in both headphones is not guaranteed (although many users, by connecting ordinary headphones to the headset, have sound. But it happens not always!).

Technical breakdown of headphones / audio card

Well, the last thing I would like to celebrate ...

Headphones can be simply spoiled (even despite the fact that in appearance with them can be all right).

Often, for example, copper veins inside the wire, especially next to the plug. Therefore, it is very recommended. Check earnings on two or three devices (not at the same time Head и classical Audio connectors, see the first part of the article).

Check the headphones on other devices!

As for the audio card - then modern cards "burn" are not so often. True, if you have problems with electricity jumps, there is no grounding, a network filter is not used - then some "impulse" with a jump could well "burn out" your "sound".

In general, now it is especially easy to "worry" (if you are not anxiety in audio and did not use a very high-quality audio card).

For example, in any Chinese online store You can buy a sound card for "visiting" penny. Such a "baby" (as in the photo below) is capable of providing quite high-quality sound.

By the way, you can also connect almost any headphones or columns (it has a standard MINI-JACK 3.5 connector).

External sound card / as an example

Sound Driver (Headphones): Search and Installation

The best solution is to download the necessary driver from the manufacturer's website of the motherboard, which is installed in your computer.

To do this, you need to know the manufacturer and the model of your motherboard. Go to the manufacturer's official website, and through the search (according to the model), or the location menu of the page with downloads for the motherboard. Here on the example of the board from MSI.

And load audio drivers. In my case, this is Realtek High Definition Audio Driver.

Save the installation file, or archive to the computer. Then open the archive and run the installation. Usually this file setup.exe. . After installing and restarting the PC, a program should appear to manage playback devices. Well, headphones should earn.

If you do not know what your motherboard is, or you cannot find the driver you need, then try download and install "High Definition Audio Codecs" from the official website Realtek: http://www.realtek.com/downloads/

Lack of audio drivers

Very popular cause of the lack of sound. Especially often occurs after reinstalling Windows OS (and even if Windows 10, when installing, picked up and put the driver "independently" - is far from the fact that it will work efficiently).

In any case, when problems with sound, I recommend "manually" reinstall the audio driver: first find out the exact model of your sound card, then download the driver from the official site, and put it. How to do it, told in one of my past articles, I bring the link to it below.

Sound is disabled in the BIOS settings

In general, by default, the BIOS is turned on (and if you change the BIOS settings and turned off the sound in them - as a rule, you yourself know about it).

Nevertheless, there are different cases (some simply changed something for ignorance and cannot remember, others tried to install Windows and accidentally "waved" too much, etc.).

Usually, in the BIOS, you must open the section "Advanced" (i.e. Advanced) and pay attention to the tab "ONBOARD HD Audio" (Although, of course, much depends on the BIOS version).

The easiest way to just reset the settings in Optimal . On how to do it - see an article, the reference to which I cite below.

Useful tips:

Whatever new equipment has been served as long as possible, try sticking to the tips:

Keep clean connectors in cleanliness.

The headset should be stored in a neat state. This will avoid breakage of the cable.

It is not recommended to use the device in minus weather.

Places subject to break can be strengthened with Cambrick or Celebrations.

It is important to remember that if one headphone does not work, the malfunction may be in a production marriage. Therefore, when buying, keep the check and warranty card. The careful ratio with the headset will allow it for a long period of time. If you are not sure in your abilities, trying to repair the equipment malfunction, it is worth contacting qualified specialists.

Checking headphones multimeter

Multimeter is a special device for checking electronics, which makes it easy to determine most breakdowns. You can buy it at any radio engineering store, it is worth a multimeter rather cheap.

Multimeter

Before proceeding to work, the device must be properly configured to check the electrical conductivity. To do this, you will need a stationery knife to open the insulation of the wires. Setting is done as follows:

  • The multimeter is set to test the electrical conductivity by means of a round lever on the housing - which of the marks corresponds to the required mode, you can learn from the user manual;
  • The black dipstick is inserted into the COM markup hole;
  • The red probe is inserted into the socket marked with the corresponding icon or letters Ma.
  • In the process of checking, the multimeter will squeeze if the current passes through the wire without problems. Take a sharp stationery knife for making cuts on isolation - it is necessary to do it carefully, so as not to damage the copper veins. Check is carried out in the following order:

  • Make two outcast on isolation - next to the plug and next to one of the headphones.
  • Polymer isolation is not the only protective barrier from which you need to get rid of. Copper is additionally covered with a transparent substance that needs to be careful, without damaging the dwelling itself.
  • Cups are applied to the cuts - black to one, red to another at the same time. If the multimeter is a beep, then the current on the cable goes - therefore, the problem is in the speakers or plug.
  • If the current does not pass, make cuts are getting closer to each other until the location is detected.

After the reason for the breakdown is detected, you can start repair. Depending on the fault location, the repair will have a different complexity - if the cable and plug can be fixed independently, then everything is not so simple with the speaker.

What to do if wheezing, creak, fountain headphones

Headphones are very simple devices, and, as a rule, they are reliably protected from various distortions of sound ...

Elimination of hardware breakdowns

Since the first two reasons do not directly affect the Wednesday of the Windows 7 operating system, but are more general, we will not dwell on them in detail. Let's just say that if you do not have the appropriate technical skills, then to repair the element failed, it is better to call the wizard or replace faulty parts or headset.

Check, broken headphones or not, you can connect another acoustic device of this class to the same connector. If the sound is reproduced normally, then the case is in the headphones themselves. You can also connect the headphones suspects to another computer. In this case, the breakdown will be evidenced by the absence of sound, and if it is still playing, it means that you need to look for the cause in another. Another sign of the failed equipment is the availability of sound in one earphone and its absence in another.

In addition, there may be such a situation when there is no sound when connecting headphones to the sockets on the front panel, and when connected to the rear panel, the instrument is working normally. This is often due to the fact that the nests are simply not connected to the motherboard. Then you need to open the system unit and connect the wire from the front panel to the "motherboard".

Eliminate errors using the "Troubleshooting Sound" tool

  1. After launching Windows 10, open "Parameters" By clicking on the Start menu by right-click and selecting the appropriate item.
  2. Go to point "Update and Security" and choose "Troubleshooting" .
  3. Now in the menu you have discovered "Play sound" And launch the troubleshooting tool.
  4. The system will search for trouble and errors.

Configuring headphones in Windows 10 and troubleshooting tool

If, after properly connecting the accessory to the computer, the sound did not appear, then from finding the causes of emerging problems, it is time to move towards active actions:

Options and tools

If you click on the icon depicting the root, in the TREAT WINDOVS 10, call the context menu and select the "Open Sound Options" item, the interface fully dedicated to headphones and input and output devices will appear on the screen.

Often, problems start from here - due to incorrectly selected settings. It is important to understand in advance with the sound source (the list is open from above - among the proposed options do not need dynamics or monitor, but connected headphones or headset), and with additional options.

As an option - in the "properties" provided "spatial sound", adjustment of the balance, and in the directory with additional superstructures - also effects.

And, if the correct device appeared in the category, the balance is configured, but the sound does not play it, it is worth contacting the default settings item. Sometimes the reset helps to save a bunch of time and return to the starting point when the problems have not yet arisen.

Other possible reasons

However, the breakdown of headphones and connector is not the only reasons. Then why don't headphones do not work on a computer? There are many nuances that need to be considered to be checked. Here are the main of them.

Incompatibility with a combo connector on new laptops and PCs

Sometimes, especially in new laptops, there are two outputs for headphones, for a headset. At the same time there is a chance that you just inserted the accessory is not there. Therefore, it will not be superfluous, whether it is a nest. But most often two nests are used by computers, not laptops.

The system did not correctly identified the audio device.

The second important problem of the absence of sounds in headphones can be the fact that the laptop misinterpacing the accessory. To correct the situation, you need to do the following:

  1. Click on the "Start", go to the "Control Panel" tab.
  2. Next select the section "Equipment and Sound".
  3. Click on the "Sound" tab.
  4. Find the icon with the headset icon, click on it, install the device to play the default sound.

Missing or incorrectly installed driver

Drivers - the main component in the playback of sound. It is clear that without them, no music, nor any other sound will play. Sometimes drivers are stolen and you just need to update. But most often they are updated independently.

A somewhat different situation is more possible, when when using a system or other impacts of the driver, the driver is flying or installed incorrectly. Then you need to set them again.

To reinstall the drivers, do the following:

  1. Click "Start". Then right-click on "My Computer", find the "Properties" section. Go there.
  2. In the window that appears, find the "Equipment" tab, go to "Device Manager" from there.
  3. Go to the Audio tab and click on the speakers right-click.
  4. Next, click "Select Update".
  5. Everything. The system itself will find the desired driver, reset it.

When using wireless headphones, you may have to install special drivers. To do this, go to the site of the official accessory manufacturer and find them there.

Removal of the virus

Another reason why the sound in the headphones connected to the computer may be lost, is the infection of the last viruses. This is not the most common cause of this problem, but, nevertheless, it should not be completely excluded.

At the slightest signs of infection scan With the help of a special attending utility. For example, you can use Dr.Web Cureit. . If viral activity is detected, adhere to those tips that are displayed in the shell of anti-virus software.

There is quite a lot of reasons why headphones connected to the PC with the Windows operating system 7 can suddenly stop functioning normally. To choose the appropriate way to correct the problem, first of all, find its source. Only after that, adhering to the recommendations given in this article, you can establish the correct work of the acoustic headset.

Viruses

Why headphones do not work on a computer - the question of many users who regularly download various programs to their gadget. Testing lovers of all kinds of utilities often grab viruses on suspicious portals, which over time lead to incorrect operation of the system.

Why do not work headphones on a computer what to do if the viruses picked up:

  1. If the device has been infected with viruses, special cleaning unnecessary and malicious programs will help correct the situation. With their help, you need to scan the system for hazardous files. Make it can any antivirus, provided that it was downloaded from the official source.
  2. When the program is downloaded, it must be installed and run the system check function. This process may take some time, so the user will have to wait.
  3. When the diagnostics is executed, the utility will show harmful files that violate the operation of the computer, and will offer them to remove them.

If Antivirus offers to delete some programs, it is recommended to follow its advice to normalize the operation of the device and do not reproduce the sound when Connect headset . If the user does not want to install the programs, it can use the help of utilities that do not need a long-term installation. One of the best such programs is the Dr.Web anti-virus.

We carry out diagnostics

To find the reason why headphones do not work on a computer, it is necessary to conduct a consistent diagnosis of all systems.

  1. First you need to exclude breakdown headphones themselves. To do this, connect them to another device, for example, to a smartphone or DVD player. If the headphones normally transmit sound, then continue the diagnosis.
  2. It is necessary to make sure that the headphones were Properly connected To computer, using the desired connector. On some models of laptops, there are identical sockets for connecting recording devices and sound-reproducing equipment. Check the connection - the corresponding sign must be present near the input, or the connector has a green color.
  3. Follow Check Volume : Often the level stands on the zero mark, so the sound does not work. Also, when you connect the headphones to the computer, it is worth checking the sound regulator located on the product itself.
  4. System Restore. Sometimes the headphones do not pass the sound due to the fact that it was reinstalled or updated the operational system (OS) - it is necessary to recover.
  5. Update or Reinstalling drivers . When the OS recovery did not bring the desired result, and the laptop still does not see the headphones, then you need to restart the driver for the audio card or update them. This technique helps to troubleshoot the problems that occurred in playback or are associated with sound recording.
  6. Banal causes. When you use Front panel Stationary PC for connection, this connector can be simply disabled. To solve the problem, go to the Windows Sound Manager (Windows) and make simple actions:

If you failed to connect headphones on the front panel of the system unit, then connect them from the back to the outputs of the audio card.

How to connect wireless bluetooth headphones to laptop - instruction + video

Brief instructions on the example of Nouta Asus (on Windows 10) and JBL headphones:

  1. Turn on Bluetooth on a laptop (if not included)
  2. Turn on headphones + search mode Availability for detection (Pressing the on or separate button).
  3. Open control Bluetooth devices in the laptop.
  4. We add a new device.
  5. From the list that appears, choose your headphones and connect.

Enabling Bluetooth on a laptop (Windows 10):

JBL headphones are connected to a laptop on Windows 10:

Why doesn't the laptop sees Bluetooth headphones?

If the laptop (Windows 10, 7 or any other version) "does not see" Bluetooth headphones, first of all it is necessary to enable (or check if if it is enabled) Bluetooth according to the instructions above .

Why laptop does not see bluetooth headphones - instructions how to connect:

  1. We check whether there is a sound on the laptop in principle. If not, go to the appropriate item below .
  2. Restart the system.
  3. Open Device Manager. Check the performance of the Bluetooth module.
  4. We are looking for "Bluetooth", if necessary, update the driver.
  5. Restart a laptop.

Open Task Manager:

Consider in more detail what to do if the laptop does not connect to Bluetooth headphones:

  1. When checking the availability of sound in principle, it is worth considering that sometimes sound can simply be eliminated "in zero".
  2. The reboot seems obvious Even stupid, but often works. Especially if the laptop does not turn off usually, but goes to hibernation. As they say, seven troubles are one reset.
  3. In most modern (and not very) laptops Bluetooth Module is the default, but it happens any ... Open Device Manager.3.1 Windows 10. The easiest way: in the search bar (near the Windows icon in the lower left corner there is either the "Magnifier" icon, or a field for a text set) type "Task Manager", and then click on the result. Either you can open the right panel (with a button around the clock), select "All Options", and in the window that opens in the search field, enter the same.
    Side panel - all parameters
    We are looking for "Task Manager"

    3.2 Windows 7. Start -> Control Panel -> System and Security -> Device Manager.

  4. The Bluetooth item is usually located at the top of the list. .4.1. Reveal, watch the device . We look, is there an exclamation mark opposite a particular module. If so, you open the menu of this device by right-click, select "Update Driver", then automatic search. Or, if you have an appropriate file - specify the path on your computer.
    Context menu - Update Driver
    Automatic search for drivers

    4.2. If several devices It may be that the default module is "with an exclamation mark", then you can select another device as default in the same menu (right). If there is no exclamation mark then you can try forcibly updating drivers and for Bluetooth, as described below . Or purchase an external bluetooth module - possibly your headphones conflict built-in (it is old, it works incorrectly, but there are no new drivers).

External Bluetooth Module can be desirable to buy and then when you don't have a new laptop (supports old Bluetooth versions), but the headphones are new, with the latest versions of the protocols. Yes, reverse compatibility is, but the appropriate module, for example, can improve the quality of communication.

Why doesn't PC sees Bluetooth headset

Despite the fact that the sound quality from wired headphones is still in most cases better than Bluetooth models, some users stop on the use of the latter. As a rule, the connection does not cause special difficulties, but if the synchronization failed to implement, then it is worth knowing how to deal with it. The instruction is shown below.

How to set up a headset in Windows 7

Sound setting in Windows 7 is no different from newer versions of the operating system.

If the sound does not receive on the headphones independently, you need to open "playback devices" through a special icon in the tray. If there is a desired headset among the available devices, switch to it and click on "use by default".

If the situation has not changed, then It will be necessary to upgrade PO . It is best to do it through the site of the sound card manufacturer. If it is not in a PC, that is, the headphone output is installed in the motherboard, then update software is required for the motherboard. The driver from Realtek is most often used. You can go to the manufacturer's website and download the current software, taking into account the version and the discharge of Windows.  

Malfunctions depending on the version of the OS

Recognize the drivers, check their presence and install in the Windows system, based on its version. Differences are minimal, but they are. In order not to get confused in the interface, call the "Win + R" string and copy the device manager's call command:

Sound is disabled in the BIOS settings

If the headphones stopped working, it is advisable to check the sound in the BIOS settings. So it happens if the user often enters the BIOS system.

What if the headphones do not work on the computer:

  1. The first thing the user will need to go to the BIOS. To do this, you need to click on the reboot button in the system menu.
  2. Next, you need to wait until the gadget prompts again, clamp the F2 key.
  3. The menu will appear before the user. He needs to choose the Advanced section.
  4. Now you need to go to Device Configuration.
  5. Enter the audio card to be called as Audio.
  6. Activate it.
  7. Save the changes received.

Important! Now you can restart the computer and re-try to reproduce the melodies using audioartite.

System settings

Sometimes it happens that the audio output is simply turned off in the system settings, and all that is required is to turn it back.

Understand it is easy enough - pay attention to the sign of speakers on Task panels .

If it has a red crossed circle, it means that the device is turned off and you need to activate it.

  1. Right mouse button click on the icon in the form of speakers on Task panels . In the list that opens, select the item "Open sound parameters" .
  2. We will be in the subsection "Sound" system parameters. In block "Output" click on the button "Sound Device Management" .
  3. Click the speaker icon, after which the button appears "Enable" which and click.
  4. Here you can immediately check the performance of the device by clicking the button "Check" .

Perhaps for many users, it will seem banal, but sometimes the sound is missing due to the fact that the volume is exhibited on zero.

It can be adjusted by clicking the left mouse button with the speaker icon, after which the slider will appear responsible for the volume.

Driver update from developer site

Please note that download any software is recommended only from official device developers.

  1. First you need to know which sound card model is installed on our computer. For this, launch Device Manager in any convenient way (for example, through the context menu Start which is called by pressing keys Win + X. ).
  2. Reveal the section called "Sound, game and video devices" . Here we find the name of our map. Most often, this is REALTEK (in our case too).
  3. We open the page on the manufacturer's website with available versions of drivers and download the one that fits our system.
  4. Download the installation file and run the installation after it boots.
  5. After that, reboot your computer (if this is not asked the installer at the end of installation) and check the result.

Lack of audio producers

If the headphones are connected, but do not give sound, then the problem can be in the absence of audiors on the device. It is their presence that affects the ability to play audio files. Drivers can be installed on a specific device, but it is incorrect, due to this, the headset will not work fully.

The sound in the headphones do not work:

  1. Enter the Connected Device Manager.
  2. Select the section "Audio".
  3. Using the right mouse button, click on the speaker icon.
  4. Click on "update".
  5. Next, the system will find a suitable headset and automatically connect it to the computer.

If the wireless headset is connected to a laptop, but there is no sound, then the user needs to find suitable drivers for the conjugate device on official sources, download them and install.

Configuring audio driver

Often, laptop manufacturers use Realtek sound cards, so you need to focus on the parameters of this sound card:

  1. Run the driver and the RealTek program associated with it, and open the settings.
  2. Opposite the item "divide all input sockets", put a check mark for activation.

  1. By activating one option, you deactivate the "combining input sockets". This option is not needed for many laptops, since the latter is just one slot under 3.5 mm mini-jack.
  2. You can put the sound to the desired value using the volume balance level without leaving the REALTEK interface.

Use Realtek HD Manager to Configure

The sound in the headphones connected to the computer is not working, the settings of the installed driver can be to blame. To change it, take advantage of the following recommendations.

In the bottom corner of the screen on the right click on the image of the speaker. Find the sound driver on the computer and run it. Wait for the window opening with the settings and select the "Speakers" rubric or "Sound Inputs / Outputs". Activate all connector parameters and the sound will earn. Also recommend that you use the program FREE SOUND RECORDER. To record sounds from a computer.

If it does not help, you may just need to update the driver. To do this, just download it from the official site and download it to the computer.

Customize headphone inputs in RealTek utility

If the drivers on the sound card work correctly, but the PC still does not see the headphones, we will make a sound setting for wired headphones on Windows 10.

Customize the inputs in the RealTek utility . It will appear after installing the drivers, in the tray around the clock. If the audio card is from another manufacturer, there must also be an application, the setting is similar. The procedure described in the screenshots is done so that the audio stream should be at the same time to all input devices, and not only on the speakers ( Very often, the computer sees headphones as speakers, when you first connect ). The same applies to the microphone from headphones (if it is connected through a separate plug).

For example, ordinary wired headphones are always defined as speakers. To be accurate, they are not at all defined by the computer as the device. The sound continues to go through the audio card (this is what the inscription "RealTek speakers" and the like in the list of audio devices), and it "decides" on which connector to serve the signal.

Open the Realtek Manager

1. Enter the RealTek settings: divide all input jacks as independent input devices:
2. Disable the definition of the front panel sockets (for laptops may not be relevant):

How to configure

To configure the audio driver through Realtek, do the following:

  1. Run the driver.
  2. Go to the settings.
  3. We put a tick next to split all input sockets.
  4. Now turn off the definition of the sockets (this is not relevant for all laptops).

If we need to configure the sound itself. We go to the quick launch panel (on the desktop, next to the clock there is a sound device icon). Moving the slider to the required value. Another way to go to the control panel. Select the Equipment and Sound tab. We will highlight the window with the list of equipment. We are looking for sound, but do not press it. Under it will be the button setting the volume. On it and you need to click. There, too, there are sliders for configuration.

How to connect wired headphones to a laptop on Windows 7, 8, 10

Using the example of Lenovo laptop and Xiaomi headphones

Wired headphones to the laptop connect, of course, easier:

  1. We find on a laptop 3.5 mm mini-jack or USB connector.
  2. We connect headphones.
  3. If necessary, install the driver.
  4. Checking what device sound is displayed.

We will analyze several nuances of how wired headphones are connected (for example, Xiaomi) to a laptop on Windows 7 or 10 (for example, Lenovo).

  1. On headphones there may be several types of plugs . From the usual mini-jack and jack (6.3 mm) to cunning XLR. But in laptops there are usually only 2 options for wired headphones: 3.5 mm or USB. If the audio connector of your headphone is another (for example, a Jack is 6.3 mm), you will have to use an adapter.
  2. Wired non-USB headphones should not Somehow visually "defined" by a laptop. That is, no notifications should appear. They can be, and may not be. When you connect a USB headphone, there is a new device notification.
  3. For USB models you need drivers . More precisely, when connected to the system on Windows 10, most often they are installed automatically, as appropriate notifications appear. In 7 and 8 versions, this is not always happening. In any case, it will be useful to "walk" to the manufacturer's website and see if there are drivers for your model. Or install them from the disk included (if the headphones have been lying for a long time ...).
  4. Theoretically, when connecting headphones, the sound automatically must be served in them. But sometimes you need to switch the laptop to headphones with built-in speakers. To do this, in Windows 10, click on the speaker icon (around the clock), then the "^" button and select the desired model. This is relevant for USB headphones. If your wired model connects through an audio connector, the standard output (Realtek) should be selected.
Open audio devices
We choose the desired

If you do not have a speaker icon or an exclamation mark there, then you need to check and update the drivers for a sound card.

Headphones do not work in Windows 10

Factors affecting such behavior of devices, several. First of all, this is the inattention of the user when connected or physical faults of the plugs or headphones themselves. The remaining problems have a software nature, and the degree of complexity of their elimination depends on what has led to a failure. It can be a service failure, system settings or drivers, as well as external influences in the form of viral attacks. Next, we will analyze in detail the most common options.

Physical malfunctions

The first thing to pay attention is the possible way out of the device itself or plug and cable. Close the question with wires will help the visual inspection. Quite often, poor-quality materials and negligent attitude lead to a flight near the plug or at the entrance to the headphones.

You can diagnose the failure of the device by connecting it to another connector, for example, on the front panel of the case, or to another computer or telephone. No sound suggests that the "ears" requires repair or replacement.

There is a possibility that "ordered long live" connectors to which headphones are connected, or components responsible for the sound on the motherboard or sound card. A clear sign - the device works on another PC. In such a situation, you will have a visit to the service center. If a headset is used, which is connected via USB, it is also necessary to check this port for performance by connecting a flash drive or other device to it. Do not rule out and the ability to fail the USB drivers. Try to reconnect the device several times, connect it to another port, as well as repeat the same steps after rebooting. Port failure also serves as a reason for contacting the service.

Connect errors

Inexperienced users are often confused inputs and outputs on the sound card, especially if there are many or no separation in color. Usually headphones are connected to the linear output of green. If your motherboard connectors are the same, carefully look at the icons on the rear plate: there may be a corresponding designation. Another, more reliable way to determine the purpose of the nests - to read the manual to the motherboard or "sound".

Setting up headphones in Windows 7

Differences from Windows 10 in this case are not much. If you cannot switch the audio output (as shown below), and Windows 7 does not see the headphones, you need to download and install the driver along with the program to control the sound output devices from the computer.

But first go to "Playback Devices".

And if there are headphones there, then install them by default. As in the screenshot below.

Or see if you have another icon, which is responsible for the sound settings. There should be a "Realtek HD Manager", or something like this.

Opening it and watch the settings on the outputs on the front and rear panel. Perhaps it can be switched to headphones.

Windows 7.

A popular error in Windows 7 is that the laptop does not recognize the headphones. Probably, the gadget is turned off in the OS settings and it needs to be connected:

  1. Go to the "Start" menu.
  2. Go to the "Control Panel" - "Sound".
  3. In the four tabs window that appears, click on the first.
  4. From the list associated with a laptop of devices (integrated speakers + headphones), choose headphones that can be signed "speakers".
  5. Click on the PCM and press "Enable".

Run the audio track on the device must earn.

Windows 7.

The most common error that happens on this version of the program - a laptop cannot recognize headphones. Most likely, the audio device is disabled in the settings. We do the following:

  1. Go to the start.
  2. Open the control panel.
  3. We are looking for a section Sound.
  4. We will highlight the window. It has 4 tabs. We need the first - reproduction (most often, is worth the default).
  5. There is a list of all audio devices that are now connected to a laptop.
  6. We find headphones (subscribe as speakers).
  7. Press them right mouse button.
  8. In the window that appears, click Enable.

Now the audio device must work.

The differences in the installation of drivers, depending on the Windows system, may still be as follows:

  1. When installing Windows 10, a standard audio driver appears. Downloading additional drivers is not needed.
  2. For Windows 7, 8 and XP, you must install audio drives separately.

How to check the inputs for headphones

Before accuses to accuse all your long-suffering comp, experts recommend checking the headphones. If they are new - you may have faced a production marriage and a PC is not here, if they dust in your shelf for a long time and, finally, you remembered them, maybe the case in the wire (contacts, cord will be interrupted and dr.).

Note : To check for marriage - connect them to another device. If everything works - then check the connection to the PC.

If not - if the headset is still on guarantees, we take it to where they bought (by law, within 14 days the consumer has the right to return the goods). If not, we refer or we try to repair yourself.  

 But at first it is necessary to check the performance of the device. Look, whether you put the plug there. On some PCs and laptops there are identical sockets for various types of headsets and you can easily confuse. Look carefully on the panel - you may see the corresponding designation in the form of a picture of headphones opposite the corresponding connector. In some PCs, instead of the picture, green diodes are used, denoting headphone jack. Here and you need to connect the headset.

Turn on the device correctly, and your breakdown will be fixed! Not? Then, if you still have not solved the problem why the computer does not see the headphones, let's see the configuration of the front panel connectors in BIOS. To climb into BIOS better than the experienced user, if you doubt your abilities - entrust all the work by specialists. In case you can not or do not know how to go to the BIOS, our article It will be useful for you.

Front Panel Connectors Connectors in BIOS

As a rule, the sound in the BIOS settings must be activated automatically, but it is better to check it. In computers with different "motherboards", the appearance of the system may differ, but in general, the actions algorithm for diagnosis and solving problems is not different. To implement the following method, if the PC does not see the headphones, it is desirable only if you feel like an experienced user. So…

  1. First, check the activation of "HD Audio Controller". Opposite it should be "Enabled". If there is another value - change it to the desired one.
  2. Next, check the sound on the front panel "Front Panel Type". From two HD Audio / AC97 settings, select the working and install

Exit BIOS and continue the download of the PC. The problem must be solved. If it does not work, it means that you need to make the appropriate settings in the OS control panel.

Sound is disabled in BIOS

Another reason why the headphones do not work on a laptop can be shot down by the BIOS settings. This usually happens when recently these settings changed or after disconnecting the sound card. That's what you need to do to correct the problem:

  1. Go to BIOS. To transition to restart the computer and press F2 during switching on.
  2. Find the Advanced tab and go to it.
  3. Go to Devices Configuration.
  4. This section check the sound card status. You will find it quickly, because, unlike others, it consists of a sentence with the word "audio".
  5. Turn on the audio card and do not forget to save the changes.
  6. Once again, restart the laptop and check the work of the headphones.

Headphones are not displayed in reproduction devices.

Another reason for the accessory is not displayed, there may be systemic problems. You accurately had to face this problem in the case when you can't connect any headphones to the PC. Most likely, something is wrong with your drivers.

The reasons may be several - drivers or absent at all, or strongly outdated. This is because some users prefer not to update the operating system and prohibit any notifications about these updates. Thus, you can skip something really important, and at some point some functions will simply stop working due to the incompatibility of different components with each other.

Correct the situation is quite simple. You need to install the necessary drivers. You can do this either using a special disk that must be included with the device or downloaded all the files from the official site of the manufacturer. Please note that the drivers for different models of computers and versions of operating systems can differ significantly, so choose those that are suitable for you.

After installation, restart the computer and insert the headphones to the desired port. Check if their PC sees. If everything is in order, it means that you really determined the cause and safely coped with the task.

System Restore

Perhaps your problem arose due to a recent failure in the system. If difficulties started just a few days ago, you can try Restore the system . To perform this task it is necessary:

  • Open " Control Panel
  • Find a window with a search (in the upper right corner);
  • Enter the text " Restoration
  • Click on the appeared section " Restoration
  • Press the " Open system restore function
  • Select a checkpoint and run the process.

But personally I prefer to do easier, namely I call Row "Perform" And I write there Rstrui. .

Consider, during the restoration of the system, programs and services that you installed in recent days can be removed. But on ordinary files it will not affect.

Rollback of the operating system

Rollback of the OS will help if there were no problems in the absence of sound on the computer.

Attention! Apply this instruction is recommended for experienced users. Before rollback, save all important files on another carrier.

To perform the operation you need:

  1. Open " Conductor "By clicking on the corresponding icon on" Task panels "
  2. Find the tab " This computer ", Click PKM and choose" Properties "

  1. Go to the item " System protection "

  1. Press Restore .

  1. Follow the instructions in the window that appears.

Built-in diagnostics of the operating system

The problem solving can help the diagnostics of the embedded Windows 10 application to troubleshoot the sound devices. If the laptop for system reasons does not see the audio jack, then the program will find and fix the problem:

  1. On the " Task panels " to find Dynamics icon , click PCM and choose " Troubleshooting Sound "

  1. After some time, a list of devices will be offered. You must choose what is required to be restored. Usually this " Speakers - Support Device with High Definition Audio "

  1. Wait for the end of the check. This may take some time.

  1. After the process is completed, follow the instructions that the application will offer.

Important! When performing an operation at a computer, you can not do something.

Additionally

Brief tips that can help if the computer does not see Windows 10 headphones.

  • In a situation with a PC, it may be that the front panel does not see Windows 10 headphones. Make sure that cables from the front panel are connected to the motherboard, as in the image. Also, in the BIOS settings of some maternal cards, it is possible to enable / disconnect the front panel connectors.

  • Also, it can affect the incorrect setting of connectors in the RealTek application, namely the logical integration of the input connectors. They are better divided.

  • If the PC does not see USB windows Windows 10, then you need to try to update the USB controller driver. It is he who will be responsible for the correct detection of USB devices.

This also includes a problem when the laptop does not see Windows 10 wireless headphones.

We hope that our article helped in solving your problem why the laptop does not see the headphones on Windows 10. If you have problems or questions, you can ask them in the comments

User reviews

The methods listed in this article are far from eliminating sound faults in relation to headphones are far from the only, but generally describe the basic actions to eliminate the problem and may help you quickly and effectively cope with the problems of the audio tract.

conclusions

I tried to understand this problem as much as possible. I checked everything on my computers and headphones. The only thing that I do not have a landline computer that would work on Windows 7. Therefore, there was not able to install the sound manager for checking.

Most often, the computer does not see the headphones precisely because of the settings, or the lack of a proprietary program to control the sound. Which you need to download for your motherboard, or sound card (if it is installed separately). Well, provided that the headphones work with other devices. After all, there may be a hardware breakdown.

Work with drivers

Each electronic device has a sound driver. If the software is outdated, "flew" or damaged by the user intervention, then the sound in the headphone does not come. An easy way to identify problems with drivers is to have a different serviceable device at hand. Connected workers headphones to laptop, and there is no sound. So, you must reinstall the sound driver:

In the case of a computer or laptop, first check the native audio driver of the installed Windows system - Realtek. In the settings of the program, a lot of sliders, the movement of which change the volume, sound inputs and outputs, channels. There are situations that for incomprehensible reasons, one of the sliders switches independently. The result is the operation of one channel or the complete absence of sound output. The problem is solved by moving the sliders until the sound appears in the headphones.

The second problem is related to the incorrect work of native headphone drivers. Over time, it is obsolete and requires updating. Driver can simply "fly." To solve the problem, enter the site of the manufacturer of the headset. From the list, select the model driver, after which the installation file is downloaded. The uninitiated should be known that the audio driver is alone, and he is responsible for the work of both headphones, and not every dynamics separately. The downloader is installed as a normal program. To activate, reboot.

If the recovery of the drivers did not succeed, it means that there are mechanical damage in headphones.

No sound in headphones what to do

Headphones are indispensable in a variety of situations - they are applied at home when necessary ...

How to disassemble and repair broken headphones

Different headphones breakdowns are a very common problem, especially if this device is used ...

Pluchem repair

If the plug broke, it is quite possible to fix it, open the plastic shell and filling the departed contacts. But it will be much easier to buy a new plug and attach it to the existing cable - there are a mini-Jackie 3.5 mm very cheap. When buying, you need to pay attention to the number of contacts - they should be as much as on the original plug. Usually there are two - for each channel, but maybe more if the headphones are designed for the phone - they have additional contact for connecting the microphone.

3.5 mm plug for joining the headphone wire

In some cases, the old plug can simply unscrew from the headphones. But it is not necessary to do it - the problem still lies, most likely, not in the plug itself, but in the cable in close proximity to it. Therefore, the old mini jack will be more reliable, capturing a couple of cable centimeters.

The new plug, of course, does not have her piece of wire, which could be twisted the same as in the case of a breakdown of the cable. However, he has contacts to which old wires are attached. So that it becomes possible, it is necessary to bargain the cropped wire and turn it through the shell of a new plug so that in the future it could be collected.

At the base of the plug, you will find two contacts for squeeze headphones and three - for the headset. Wires must be attached to them. This is done as follows:

  • bare wires twist;
  • Grounding is connected to the sleeve - long metal strip;
  • Channels are connected to short contacts in any order - everything will work and in case of an error, simply channels will be changed in places;
  • Wires are soldered to contacts;
  • The plug body is going.

If the headphones did not start working, probably disrupted the insulation of the wires - you will have to repeal the plug and check whether the copper veins come into contact with each other.

Thus, fix the stolen or broken cable, and also replace the headphone plug is quite simple. For this, no special skills are needed - only accuracy, soldering iron and a little time.

Sources

  • https://setafi.com/elektronika/naushniki/kompyuter-ne-vidit-naushniki/
  • https://koskomp.ru/rabota-v-windows/pochemu-noutbuk-ne-vidit-naushniki-v-windows/
  • https://compuals.ru/ustranenie-nepoladok/kompyuter-ne-vidit-naushniki-windows-10
  • https://headphonesbest.ru/faq/pocchemu-kompyuter-ne-vidit-naushniki-442
  • https://wifigid.ru/reshenie-prblem-i-oshibok/pk-ne-vidit-naushniki.
  • https://fishki.net/3390451-chto-delaty-esli-ne-rabotaet-naushnik.html
  • https://winda10.com/oshibki-i-prblemy/ne-rabotayut-naushniki-v-windows-10.html
  • https://mywebpc.ru/windows/ne-rabotayut-naushniki/
  • https://naladkaos.ru/windows-10/noutbuk-ne-vidit-naushniki.html
  • https://topnaushniki.ru/sovety/naushnik-ne-rabotaet.
  • https://myearphones.ru/instruktsii/ne-rabotayut-naushniki-na-noutbuke-ili-pk.
  • https://prostocomp.net/sistema/ne-rabotayut-naushniki-na-kompyutere-pochemu-ne-idet-zvuk-na-naushniki.html
  • https://zvukoved.net/naushniki/chto-delat-esli-ne-rabotayut-naushniki.
  • https://kompukter.ru/perestali-rabotat-naushniki-na-kompyutere-windows-10/
  • https://mysitem.ru/windows/596-can-te-see-the-headphones.html.
  • https://ocomp.info/ne-rabotayut-naushniki-net-zvuka.html
  • https://lumpics.ru/headphones-dom-not-work-on-a-computer-with-windows-7/
  • https://wifigid.ru/raznye-sovety-dlya-windows/ne-rabotayut-naushniki.
  • https://tehnofaq.ru/chto-delat-esli-ne-rabotayut-naushniki-na-noutbuke/
  • https://tehnika.expert/cifrovaya/naushniki/peredali-rabotat-na-noutbuke.html.
  • https://headphonesbest.ru/faq/ne-rabotayut-naushniki-1867
  • https://wifigid.ru/raznye-sovety-dlya-windows/noutbuk-ne-vidit-naushniki.
  • https://mywindows10.ru/peredali-rabotat-naushniki/
  • https://soft-ok.net/5020-kompyuter-ne-vidit-naushniki.html
  • https://setafi.com/elektronika/naushniki/noutbuk-ne-vidit-naushniki/
  • https://lumpics.ru/headphones-dont-work-on-pc-with-windows-10/
  • https://windowstips.ru/noutbuk-s-windows-10-ne-vidit-naushniki.

Personal computer, unlike laptop, is not equipped with its own audio system. Speakers and headphones are used to play sound. Devices for listening to music are connected by 3.5 mm plugs (Jack) into special connectors located on the front or rear panel of the system unit. There are also wireless headphones running through Bluetooth. The problems arising with the headset in most cases can be corrected independently.

The computer does not see the headphones - what to do?

Control of gadget

The headphones with a microphone are equipped with two plugs: green and pink. Each of them must be connected to the corresponding color connector. Green - headset, pink - microphone. Correctness of the connection must be checked primarily: headphones are tightly inserted into the desired connector. Make sure the front panel is connected to the motherboard. Sometimes when assembling PC, this nuance is overlooked.

The computer does not see the headphones - what to do?

It is also worth trying whether the sound is played in the headset on another device. It can be a smartphone, an MP3 player or another computer. So you can exclude the malfunction of the gadget and proceed to solving the problem directly in the PC itself. If the sound is not reproduced on any device, you will have to purchase new headphones. They can be repaired in some cases, but this is temporary.

Setting the sound card

By excluding the gadget malfunction, it is worth checking whether the sound card is correct. To do this, go to the Device Manager. The first method: in the "Run" window (called by pressing the Win + R keys), where to enter Devmgmt.msc. Second: Right-click on My Computer and select the desired item in the drop-down menu.

The computer does not see the headphones - what to do?

In the "Device Manager" of Windows, you can get information about any computer node. In this case, you need to pay attention to the item "Audio inputs and audio outputs". If an exclamation mark is burning near the device, you must install a sound card driver. You can download it on the official resource of the manufacturer. It is important to verify that the software version is relevant.

There are some more options for sound payment:

  • breakdown of an external sound card (if the connection is conducted through it).
  • BIOS settings failure.
  • Conflict drivers when replacing an old sound card for a new one.

Connected via USB sound card can be replaced. If the headphones do not work due to the fact that the system has been saved on the system of the driver of the old audio address, it must be removed via the "Device Manager". Right-click on the desired equipment and click "Delete the device".

It is recommended to double-check the BIOS settings:

  • When you start a computer, press one of the buttons: F2, TAB, DEL or other required.
  • Go to the BIOS "Intergrated Peripherial" menu.
  • Find the item "Sound Card", "Audio" or similar.
  • If on the opposite it is the value "disabled", change to "enabled".
  • Press F10 to save.
  • To restart a computer.

If the sound card is normally displayed in the "Device Manager", but the audio is not played, it is necessary to double-check the sound settings to the Windows tools.

Playback devices

One of the common reasons that there is no sound in the headphones, is the wrong adjustment of the audio devices in the operating system. To go to the sound control menu, you need to right-click on the sound icon in the system tray.

The computer does not see the headphones - what to do?

In the "Sound" menu that appears, you must select the Playback tab. The list will display all sound devices used on a particular PC. Opposite the headphones should stand a green tick. If it is missing, you need to click on the right mouse on the desired hardware and click "Enable".

The computer does not see the headphones - what to do?

There are headphones that equip the built-in software. In this case, you must install the drivers from the disk that went to the set with a gadget, or download software on the official website of the manufacturer. Otherwise, the headphones will not work correctly.

Bluetooth headphones do not work

Wireless headset - a convenient alternative to wired headphones. Lack of cables and low risk of breakdowns made Bluetooth devices very popular. There is no integrated Bluetooth PC PC, it is necessary to buy it separately and connect an adapter via USB. If wireless headphones do not work, the reasons may be the following:

  • Not included Bluetooth on a computer;
  • The driver is not installed on the Bluetooth adapter;
  • Headphones are not included;
  • The connected device is outside the network area;
  • Headphones are faulty.
The computer does not see the headphones - what to do?

Check the device connected correctly - detailed instructions always comes with headphones. Check the driver in the Device Manager - you need to select "Bluetooth". The presence of an exclamation mark or the lack of a Bluetooth device in the list means that there are no drivers. Download it needs on the official website. Additionally, you must check the sound settings specified above the method. It is important that in front of the headphones you are going to use, there was a green tick.

Cheap headphones often fail. So that it does not have to break the head often, why the headset does not work again, give preference to proven brands. High-quality headphones will serve for several years, the main thing is to connect them to the computer correctly.

A source: Nodevice.com.

Headphones - one of the most necessary devices among the whole computer peripherals. In most cases, the instructions for their operation are extremely simple: it is enough to connect them to a computer using a cord or Bluetooth wireless connection, and after that they will immediately begin to work fully. However, it can happen that the computer may not recognize the headphones as a sound reproducing device. Read what causes such situations and how to cope with similar errors.

The computer does not see the headphones

The computer does not see the headphones

Why the computer may not see the headphones

Often, after this, as it is found that the headphones do not reproduce the sound and the system does not even determine them, users think about the malfunction of the headphones themselves and refer them to repair, or buy new ones. This outcome is possible, however, in fact, the list of possible causes is much wider, read the list of them:

  • No drivers for a sound card of a computer, or their obsolescence. This is quite possible to name the most popular reason for not recognizing the headphone system. Solved the installation of drivers the last version;
  • non-working connector 3.5, and in the case of using a wireless interface for connecting (Bluetooth), a Bluetooth module malfunction can be a cause;
  • Various mechanical damage to headphones, or problems with the hardware device itself. In such cases, the correction of the problem at home is not possible and without contacting the service center or the replacement of headphones to the new ones can not do; Mechanical damage to headphones

    Mechanical damage to headphones

  • Also, the cause can be the malfunction of the cord. For example, it may be its beggars or contact waste;
  • It is necessary to make sure that the cord for headphones is connected to that connector. The fact is that in the system unit, the headphone connector is identical to the microphone connector, and they can differ only in color (the connector for sound-reproducing devices is always green). On laptops under headphone jacks and microphone, special designations can also be placed; Determine the headphone connector

    Determine the headphone connector

  • The most unpleasant moment, but at the same time a very possible is a malfunction of the sound card itself. In this case, you will also have to refer to specialists.

Learn more detailed information how to increase the sound in headphones. On a computer, from our new article.

What to do if the computer does not define headphones

If the computer does not see the headphones exclusively due to the internal problems associated with the operating system, their elimination will not take much time and strength. Your attention is provided with step-by-step instructions on how to make the computer identify your audio device.

We update the driver. Method 1.

Step 1. The main thing is that you need to do to solve such a problem - update the drivers to the sound card of your computer. To do this, go to the "Start", called the Windows OS icon. Then, using the left mouse button, click on the computer. In the context menu that opens, select the graph with the name "Properties".

Open the "Start" using the left mouse button, click on the "Computer", select "Properties"

Open the "Start" using the left mouse button, click on the "Computer", select "Properties"

Step 2. In the window that appears with the name of the System Properties, you need to go through the item with the color text on the left "Device Manager".

Open the Device Manager

Open the Device Manager

Step 3. In the Device Manager, you can find all devices that are the necessary part of the system, as well as other connected devices. From the whole list of items, select "Sound, Video and Gaming Devices". Several subparagraphs will open, you need to select the item named your sound card. The screenshot viewed as an example, the PC uses a standard sound card called Realtek High Definition Audio, which is located in most computers. Click on it with the left mouse button, then go to the upper column "Update drivers ...".

Select Realtek High Definition to update drivers

Select Realtek High Definition to update drivers

Step 4. The driver update program opens. It needs to select "Automatic search for updated drivers", which will allow you to find the last versions drivers for your sound card. Then they will install automatically, without any participation in the process of the computer user.

Select "Automatic search for updated drivers"

Select "Automatic search for updated drivers"

We update the driver. Method 2

If the automatic method of the driver for some reason was not installed, you can set them manually. This is done like this:

Step 1. To download the file with the drivers, we turn to the official website of the RealTek sound card manufacturer. (Realtek.com)

Open the official website of the RealTek sound card manufacturer

Open the official website of the RealTek sound card manufacturer

Step 2. Open the menu with the sections of the site by clicking on the icon with three horizontal strips, which is in the upper left corner. Here you need to select the "Downloads" tab, and then go to the COMPUTER PERIPHERAL ICS item.

Select the "Downloads" tab and go to the COMPUTER PERIPHERAL ICS item

Select the "Downloads" tab and go to the COMPUTER PERIPHERAL ICS item

Step 3. Opposite the "PRODUCK LINE" text you need to select a category with drivers for a sound card. Therefore, select "PC Audio Codecs". After that, select the partition whose name matches your sound card.

Choose a section that matches your sound card

Choose a section that matches your sound card

Step 4. Find a version of the driver in which your operating system support is present. After that, click on the blue icon to the left of the description you need.

Select the version of the driver in which your OS support is present.

Select the version of the driver in which your OS support is present.

Step 5. On the page that opens, you need to agree with the installation conditions, putting a check mark on the text "I Accept to the Above." Slightly below, enter the address of your email in the "Email" field to which the link to download the archive with the drivers will be sent.

We enter the address of your email in the "Email" field to which the link will be sent to download the archive with drivers

We enter the address of your email in the "Email" field to which the link will be sent to download the archive with drivers

Step 6. Enter the captcha, and then the installation will begin. When the file is downloaded, unpack it and install as the usual program.

Step 7. After completing the installation of the drivers, reboot your system.

What to do if the microphone does not work on headphones

Microphone does not work on headphones

Microphone does not work on headphones

If you encountered a non-working microphone on headphones, follow these instructions:

  • Update or install your sound card drivers. In most cases, installing new driver drivers allow the problem;
  • Check the performance of the microphone on any of the sites created specifically for such purposes. For example, here - https://webcammicterest.com/check-microphone.html;
  • If your microphone has not earned after updating the drivers, check the microphone plug into that connector, because It can be stuck in the headphone socket.

Learn also effective ways to check whether the microphone on the computer works in our new article.

In case, after executing these instructions, the problem remains, then most likely, the case is in terms of the microphone itself, and you will need to contact the service center.

Video - How to connect headphones to a computer

Did you like the article? Save not to lose!

Headphones - one of the most necessary devices among the whole computer peripherals. In most cases, the instructions for their operation are extremely simple: it is enough to connect them to a computer using a cord or Bluetooth wireless connection, and after that they will immediately begin to work fully. However, it can happen that the computer may not recognize the headphones as a sound reproducing device. Read what causes such situations and how to cope with similar errors.

The computer does not see the headphones

The computer does not see the headphones

Why the computer may not see the headphones

Often, after this, as it is found that the headphones do not reproduce the sound and the system does not even determine them, users think about the malfunction of the headphones themselves and refer them to repair, or buy new ones. This outcome is possible, however, in fact, the list of possible causes is much wider, read the list of them:

Learn more detailed information how to increase the sound in headphones.

The computer does not see the headphones

On a computer, from our new article.

What to do if the computer does not define headphones

If the computer does not see the headphones exclusively due to the internal problems associated with the operating system, their elimination will not take much time and strength. Your attention is provided with step-by-step instructions on how to make the computer identify your audio device.

We update the driver. Method 1.

Step 1. The main thing is that you need to do to solve such a problem - update the drivers to the sound card of your computer. To do this, go to the "Start", called the Windows OS icon. Then, using the left mouse button, click on the computer. In the context menu that opens, select the graph with the name "Properties".

The computer does not see the headphones

Open the "Start" using the left mouse button, click on the "Computer", select "Properties"

Step 2. In the window that appears with the name of the System Properties, you need to go through the item with the color text on the left "Device Manager".

The computer does not see the headphones

Open the Device Manager

Step 3. In the Device Manager, you can find all devices that are the necessary part of the system, as well as other connected devices. From the whole list of items, select "Sound, Video and Gaming Devices". Several subparagraphs will open, you need to select the item named your sound card. The screenshot viewed as an example, the PC uses a standard sound card called Realtek High Definition Audio, which is located in most computers. Click on it with the left mouse button, then go to the upper column "Update drivers ...".

The computer does not see the headphones

Select Realtek High Definition to update drivers

Step 4. The driver update program opens. It needs to select "Automatic search for updated drivers", which will allow you to find the last versions drivers for your sound card. Then they will install automatically, without any participation in the process of the computer user.

The computer does not see the headphones

Select "Automatic search for updated drivers"

We update the driver. Method 2

If the automatic method of the driver for some reason was not installed, you can set them manually. This is done like this:

Step 1. To download the file with the drivers, we turn to the official website of the RealTek sound card manufacturer. (Realtek.com)

The computer does not see the headphones

Open the official website of the RealTek sound card manufacturer

Step 2. Open the menu with the sections of the site by clicking on the icon with three horizontal strips, which is in the upper left corner. Here you need to select the "Downloads" tab, and then go to the COMPUTER PERIPHERAL ICS item.

The computer does not see the headphones

Select the "Downloads" tab and go to the COMPUTER PERIPHERAL ICS item

Step 3. Opposite the "PRODUCK LINE" text you need to select a category with drivers for a sound card. Therefore, select "PC Audio Codecs". After that, select the partition whose name matches your sound card.

The computer does not see the headphones

Choose a section that matches your sound card

Step 4. Find a version of the driver in which your operating system support is present. After that, click on the blue icon to the left of the description you need.

The computer does not see the headphones

Select the version of the driver in which your OS support is present.

Step 5. On the page that opens, you need to agree with the installation conditions, putting a check mark on the text "I Accept to the Above." Slightly below, enter the address of your email in the "Email" field to which the link to download the archive with the drivers will be sent.

The computer does not see the headphones

We enter the address of your email in the "Email" field to which the link will be sent to download the archive with drivers

Step 6. Enter the captcha, and then the installation will begin. When the file is downloaded, unpack it and install as the usual program.

Step 7. After completing the installation of the drivers, reboot your system.

What to do if the microphone does not work on headphones

The computer does not see the headphones

Microphone does not work on headphones

If you encountered a non-working microphone on headphones, follow these instructions:

  • Update or install your sound card drivers. In most cases, installing new driver drivers allow the problem;
  • Check the performance of the microphone on any of the sites created specifically for such purposes. For example, here - https://webcammicterest.com/check-microphone.html;
  • If your microphone has not earned after updating the drivers, check the microphone plug into that connector, because It can be stuck in the headphone socket.

Learn also effective ways to check whether the microphone on the computer works in our new article.

In case, after executing these instructions, the problem remains, then most likely, the case is in terms of the microphone itself, and you will need to contact the service center.

Video - How to connect headphones to a computer

Leave a Reply