Scarf, knitted in hand, in 30 minutes and other scarves - Snada :: Infoniac

Scarf tied in hand in 30 minutes and other scarvesUseful advice

Scarves are a wonderful fashion accessory that helps keep warm in cold days or just complement your outfit.

They never happen too much, and you can always make a scarf with your own hands.

Large, volumetric Sandy scarves or Scarves-Khomuta Now at the peak of fashion, and they warm the neck and face perfectly.

Here are some useful ideas, as quickly and just tie a circular scarf.

Knitting scarf-sander on hands without spice in 30 minutes

Sharf-5.jpg.

Such a scarf-shed or scarf-claw can be associated without spice in just 30 minutes.

You will need:

For Sharp-eight - 4 Mokes of very volumetric yarn (1 MOTOK - 100Gram / 40 meters or 150gram / 100meters)

  1. Measure 4 equal parts of the yarn of a total length of about 3 meters.
  2. First make a loop and grind it on the wrist.
  3. Sharf-1.jpg
  4. Now make at least 12 loops on your right hand.
  5. Remember that the loops you do from the "tail" yarn so that the working thread is wrapped around the thumb.
  6. Second row: Holding a working thread on the right hand, remove the first loop with the hand. Grind the resulting loop in the left hand. Continue with the rest of the loop, creating the following series in the same way.
  7. Sharf-2.jpg.
  8. To finish the scarf, you need to close the loops. To do this, work from the first and second loop, which makes the second through the first. Continue also with the following loops, selling the previous one.
  9. Finish with all the loops and at the end, tie a node.
  10. Sharf-3.jpg.
  11. When you finish covering all the loops, skip the remaining yarn through the last loop and make a strong knot. Leave about 70 cm yarn at the end.
  12. To make the eight scarf, fold it face up and connect both ends.
  13. Take the long end of the thread and skip between the loops on both sides (as shown in the video).
  14. Hide the remaining ends inside the scarf. Finish, knotting knots and cut off unnecessary.
  15. Sharf-4.jpg.

Scarf claw do it yourself

This scarf-clamp can be easily made from the old sweater.

See also: What can be done from the old sweater with your own hands?

Sharf-10.jpg.

How to tie a scarf-sneem knitting needles (video)

Scarf Snub Scheme Space

Such a scarf of the stern knits quite quickly pearly viscous circular knitting needles and can become an excellent gift for loved ones.

Sharf-7.jpg.

You will need:

  • 1-2 Mokea Surround Woolen Yarn
  • Circular spokes 9 mm
  • Card needle for stitching edges

1. Type 49 loops on circular needles. If you want to make a scarf-sneody wider or already, dial the odd number of loops.

2. Coup on the loop in the circle . You can find out how to do it, on video.

3. Start knit 1 front, 1 hovering loop to the end of the row. When you go to the next row, continue in such a way that you will have an invalible on the front loops, and above the wrong coming.

4. Continue to knit until the desired length and hide the ends.

Scarf-shed for beginners

Sharf-8.jpg.

This simple-scarf stern knits simple elastic 2x2

Final result:

100 cm around, 30 cm in height

You'll need:

  • 200 m volumetric yarn
  • Circular spokes 10 mm
  • Needle for yarn

Dial 140 loops. Connect into a circular row, without twisting ne тLee.

1 row: 2 facial, 2 Pouring

Repeat to the desired length.

Circular scarf stern from simple scarf

Sharf-5-1.jpg.Sharf-5-2.jpg.Sharf-5-3.jpg.

For a scarf with tassels, fold the scarf half the length and tie tassels together. Now turn the scarf so that the tassels are inside and wrap around the head several times.

See also: 20 original ways Beautifully tie a scarf

Sharf-6-1.jpg.

Sharf-6-2.jpg.

Sharf-6-3.jpg.

For a scarf without brushes, link the right and left corners of the scarf, and also remove and hide them back.

How to wear shed scarf

Scarf for the evening, plaid over the weekend ... Even if you have never knit, thanks to a unique polyester yarn with ready-made loops, you can make it very quickly with your own hands to make stunningly beautiful and cozy things. See how simple it is.

Article author: Natalia Kocheganova

Incredible in everything

This yarn is simply impossible not to fall in love! Just take her in hand. Soft, tender, warm, bulk - it conquers from the first touch.

This yarn is a monophonic and melange, that is, combining several colors.

But the main thing that made this yarn is incredibly popular, it is a loop in which the threads are collected. Thanks to this, you can knit straight with your hands, rubing the loops in each other.

At the same time, due to the fact that the threads are volumetric, and the loops are large, the knitting speed is truly impressive. It is quite realistic for the evening to tie a scarf or a bedside rug.

Two simple viscosity

The easiest way to knitting is facial smooth. Spread the thread of the desired length loop in one direction.

Without breaking the threads, put the same segment of the thread loops towards. Grind the loops of the second segment through the loop of the first. This is the fastest way to mating. Facial-related products are obtained by soft, but some loose.

A more dense knitting will turn out when crossing the loops. The principle is the same, only a loop of a number in which the loop will stretch, you must first cross with the neighboring. Of course, patterns that can be knitting from such a yarn there are a huge set. But believe me, these two is quite enough to create great things for yourself and interior.

Easy peasy

The most popular product from yarn is plaid. Most often - children, although no adult will refuse such a softness and tenderness. Approximate flow rate of the yarn on the mere size of the meter per meter is 5 motors when knitting facial stroke.

If you decide to tie a rug, it is better to use cross-mating, the product will be more dense.

And facechair, and the cross is excellent, interior solutions for the reinforcement of pillows or the otfikov are obtained.

In this case, in order for a knitted cover to be good for the emblem, it is necessary to start knitting from the fact that several loops are skipped into one loop. And so for 3-5 rows. That is, for example, in the first row in one loop, six is ​​skipped. In the second row in each of the six loops, two - the total number of loops 12 is passed. In the third row, one loop is progressing without an increase, two loops are stretched into the following - the total number of loops 18. Next, the knitting continues exactly, and at the end, the lifting is similar.

For inspiration

If you master simple things and love this amazing yarn, you will probably want more.

See what amazing funny toys can be associated from such a unique micropolyser.

What amazing soft and truly cozy home slippers are obtained from this yarn.

How to warm in autumn-winter days bulk, warm cardigans.

I am sure you give this yarn your heart 🙂

Read more:

It may you like:

Stylish and fashionable knitted scarf on hands - it's a warm, practical and universal detail of the wardrobe! The technique of Yubimi came to us from Japan, where more and more becomes popular knitting, imitating the work with knitting needles or crochet, but at the same time the craftswoman uses only fingers and brushes. And, of course, it is not at all necessary to buy such products of Schridoroga, because it is not difficult to make a stern for 30-40 minutes, even if you don't know how to knit at all!

What wool can be used

To begin with, consider the types of wool that we can apply:

  • Ordinary wool, folded into several threads - it is quite easy to find on sale, problems will not arise;
  • Special thick wool - you can find it in large stores for Hand-Made, but it is also worth considering that such motches have a small length of the thread and are quite expensive. A little cheaper it can be found in Chinese shopping areas (Aliexpress, Buyincoins.

There is also an option to tie a fat cord on the scarf with your own hands.

Twice spinning the thread index and middle fingers of the left hand. If you wish to make a cord thicker, throw the loops on 3 or 4 fingers.

The loop, which is located closer to the palm, take off, traveled to her through the second, worshiping my finger closer to the upper part of it, we will have only one loop on your fingers.

Again the eight of the eight, now new loops are close to the edge. Remove the loops that have previously remained on your hand.

one 2. 3. four five 6. 7. 8 9

Such a cord can be any length, thickness and density. You can connect both openwork, air fashion shocks, and dense, warm.

Knitted scarf do it yourself

ten

For a stern, with a length of 1.5-2 meters, We will need 350-500 grams of wool. We will also need a hook number 6 or number 7, with which you need to turn the free tip of the sliced ​​string, connecting both edges of the scarf.

To tie a scarf width of 30 cm, we need to type 10-12 kettles, it all depends on the thickness of the wool and knitting density.

To dial n., We stretch the thumb with your fingers, taking it as when working with the knitting needles, instead of the working knitting needles we will use your right hand.

Finished p. We begin to lie as follows: The first loop is the edge, just remove it on the right hand, now we go to the right hand in the second p., Capture the working string and drag it - this is facial p., All the remaining do it in the same way.

The third row is made by facial or involving butterfly - on your choice. If you prefer alternate rowers, a long and narrow canvas are formed.

It is extremely important in the process of work to observe the same size of all looping, while maintaining the uniform tension of the thread.

Having reached the length you need, you should correctly close all the loops. It is carried out in the same way as in the usual knitting knitting needles: we remove the first pettitz, the second to check and do it first, knocking the third, we do it in the second and so on until the end of the row.

Scarf ready!

More vividly the work process is shown in our Video master class :

Knitted scarf with her own hands: Step by step photo Master class for beginners

eleven 12

We need:

  • Thick (as in the photo) is not a steaming woolen yarn - 3 Motochka, about 280 meters;
  • Sharp scissors.

A thick cardboard tube from paper towels or parchment paper for baking can also come in handy. In case you need to be distracted from work, you can remove loops on it.

thirteen

Description

We will work immediately with three shirts of yarn: we reach the ends from each meka, we connect them with each other. Motches also put in the basket so that they do not interfere with the households when knitting.

Calculate the length of the thread as follows: For every 10 loops, about 1-1.4 meters of the thread are consumed, we need it to have it, so that the row is enough. Decoile 1.4 meters of thread on the scarf and do it yourself 11 kettles.

14

We start knitting the scarf from the sliding nodule. We put the thread on the left palm, in the right one to keep the tip of the yarn coming from the crossboxes. Right hand make the turn of the thread around your fingers left.

15

Holding a thumb of the left hand of the ends of the threads, which were crossed, we shoot the resulting loop and, from the back, I wake up the upper tip of the yarn (as shown in the photo below), creating a new loop.

16 17.

After that, simply pull the second loop on one side and the free ends - on the other, knit the nodule.

eighteen

The last loop is simply changing on the wrist of the right hand, tighten it a bit, pulling the tip of the thread, which goes to the postka.

19

For a set of a second loop, we do with your own hands for a free tail thread (not for the one that goes to the floppers) and form a new loop from it, as shown in the photo below.

20

Through this loop, we told the left hand and grab the tip of the yarn going to the postka.

21.

I stretch the captured tip through the loop and throw the pet holder, which is now in the right handle.

22.

That loop, which is located in our left palm, slightly turns against the clockwise, then we dress it on the right brush. Tighten the loop, twitting yarn and the second buttercup is ready. We continue to knit according to the scheme to a set of 11 loops.

23.

We will knit the scarf with the right brush to the left, and then - on the contrary, and so on. Important! Touch the row to the end, we do not turn the scarf, how do it on the spokes, but in the opposite direction. A lion. Ladon take a thread that comes from the crossboxes, put it on the thumb, etc. Hold the yarn.

24.

Holding a string, lion. Ladon take the first pet. With ave. And through the cam, we drag it forward and let go.

25. 26.

In the pr. Palm, we keep the new pet., Which you need to go on the left brush now. Wear, stretching the handle through the Pet. From above side and forth (see the photo below), then tighten it.

27. 28.

We do the same with Pet. With a pr. Brushes, but now it will do a little more difficult, since both of our handles are torn to each other.

Do not forget to delay and tighten the necessary PET with the need. To keep them the same size and shape.

When all Pet. Will be on the lion. Brushes, repeat everything on the same principle, but on the contrary. We ass. Ladona tip of yarn, which goes from three intake.

29.

We have it from top of the thumb left. palms, lion. Handle clamp this tip.

thirty

Etc. handle remove Pet. with lion. wrists and stretch forward. We let go. with a pr. wrist.

31.

Etc. The hand is in front of the front and forth through the groping in the lion. Palm new p., wear a new p. On the brush of the handle. We continue to knit the scarf further along the exhaust scheme, changing the hands, until the length of 150 cm.

32.

If you need to leave work, just transfer everything from the wrist on the cardboard pipe, prepared earlier. Take the thick thread into the pipe hole and tie it on top of it. It is important to remember where we have the front side: when dressing knitting again on the wrist, turn it with pigs to yourself.

33.

This knitting technique is characterized by their own hands in that the nodules on both sides of the work alternate from very free to tight, and all because in the process of work we do not make turns at each new row.

34.

Now we proceed to the closure of the edge. We begin, as usual, from the set of two new loops, now knit another one and stretch it through the two previous ones, let go. It is not necessary to stretch the thread - the edge must be elastic!

35.

We recruit a new pettle, put it on the handle, again we drag the one that was on the handle before, through a new one and again we release: so until the end of the row, at the end we make a nodule, stretching through the last p. Ends of yarn. Loose tail leave.

Now we have three options: we can sew the edges and get a knitted sneody, leave a knitted scarf, as it is, or sew decorative pumps.

If you sew edges, you should use the remaining thread tail, stretching it with a zigzag, connecting both sides. In order for this seam to be almost inconspicuous, the tail skip under V-shaped n. In the pattern on the face of the scarf, as shown in the photo below.

36. 37.

We make knots, tighten it stronger, then one more. Leaving 20 cm. Threads, insert them in the seam with an inside, simultaneously performing additional nodules for reliable fixation of the thread. An unusual scarf is ready!

How to tie a scarf with hands: video MK

We hope our today's master class with a detailed description will help you make beautiful, fashionable and original knitted scarves with your own hands. Ask questions in the comments, we will answer them with pleasure, as well as share with us a photo of your work. Smooth loop and pleasant knitting!

Before you a very interesting selection how to tie a scarf without spokes, hands. You probably heard that today in trend a manual knitting, without tools - spokes or hooks.

Yubiimi technician, which is used for a long time in Japan, did not appear in Europe and got a name ARM-knitting . What it is and with what it is eaten, you will learn from this selection in which we posted Master class for beginners: how to tie a scarf with hands, without using a hook and needles with step-by-step guide . In the photo you can see what you will succeed, if you buy yarn and spend half an hour of your time on a weaving accessory:

Scarf tied on his hands: What will take

For knitting scarf without spoke, you can use any yarn. If you want to get a thin openwork scarf, take a thin thread. For a bulk winter accessory you will need thread thread. For example, Merinos or wool with the addition of acrylic.

How to tie a scarf with hands

On the photo, a scarf connected without spokes

On average, you need 3-4 sumps of large yarn. That is, 100 gr. So, about 300- 400 grams will go to the scarf. From such a volume of yarn, you will have a scarf with a length of 150-155 cm. Width - about 35-40 cm.

Scarf of a large knitting spice: MK for beginners

Before starting work, remember how you knit. Only in this case you will use your hands instead. But the process is the same. Let's start knitting from a hinge set.

  1. We make the first loop and do it on the wrist.
  2. Make so many loops as you need to get the necessary width. As a rule, 12-13 kettles are enough.
  3. Drawing a loop, proceed to knitting the first row. The first loop is-gracious. We take it about with your hands and transfer to another hand. Now we start your hand in the second loop and stretch through it the thread. We also do the same with the rest of the hinges.
  4. The main rule when knitting the scarf hands is to observe the same loop. Then the product will be whole.
  5. The third row can be signed both facial and irons.
  6. Touch the scarf to the desired length, you can close the loops. Do it easy. The principle is the same as when knitting with ordinary spokes. The first loop is not pronounced, but removed. The second is lying. Through it, and through the first new loop, and so until we finish.

Now you can go directly to viewing. This master class will teach you knit scarf without the use of spokes. In it, the craftsman on the fingers shows how it is easy and just knits a scarf without spokes.

Video: Scarf hands in 30 minutes

Knitting of a volume scarf or slander

We offer another MK. Following step-by-step photos, you can easily connect the accessory in just half an hour.

Step one.

  1. We take the end of the thread.
  2. We make an air looping from it, as in the photo.
  3. Dog through the loop thread.
  4. We put it on your hand. The first loop is ready.

Step second.

  1. We make the second working loop. To do this, divert the threads in different directions and clamp their ends with loose fingers.
  2. Pull the thread from the thumb forward and stretch through it the thread that you must remove from the index finger. That is the opposite.
  3. Remove the resulting loop with a finger and put on your hand.

Step Three.

  1. Unlike knitting on the needles, we knit the scarf with the right hand to the left, and then on the contrary, without turning the product. To tie the second row, take a thread from the meak and put over your thumb. With the fingers of the right hand, we hold our yarn.
  2. Holding the thread, removing the left hand of the loop with the right and told it through the fist. Lower.
  3. In the right hand, pushing the loop again that we need to put on the brush left.

As can be seen in the photo, it is necessary to knit from the right to left and left to right. Knitting technique on the right hand, similar to the left. To straighten the loop, pull the product below.

Step fourth.

The last row is doing so. We recruit 2 new loops on your hand and, as in the knitting needles, close their third. Make sure that the edge is not pulled. It must be free and fit the canvas. Thus, we close a row to the last loop and stretch through the last free end of the thread. We make nodules on it and leave.

What can be done with what we did? There are several options.

  1. Sew the edges of the scarf connected with their hands together and we will have a scene.
  2. Leave everything as it is and enjoy as a traditional scarf.
  3. Decorate the ends with pompoms.

Elegant Sand without Spice

So that our selection was as detailed as possible, we offer another master class

We will need 3 shirts of yarn. To make the first loop, see the 1.5 meters of the thread and make a loop, putting it on your hand, as in the photo.

The remaining hinges are typed as follows: sketch the loop on the left hand in the bottom upward, and make a new loop from the working thread. Perform 10 loops.

To stick the first row, put a knitting thread on the thumb right. The remaining fingers are chopped into the fist. Remove the extreme looting, stretching it out of the fist of the right hand. Now you have a loop in your hand. Put it on your left hand. Do the same with the rest of the loops.

The next row do the same, but already in mirror reflection. Continue to knit until you have 3-4 meters of knitting thread.

Well, that's all, you did not notice how you knit a beautiful scarf with your own hands. Now we need to finish it and close the loops. To do this, check the first two loops of the row and return the resulting loop into a row. Take 2 loops again and tie, traveled through them one loop, and so until you reach the last loop. Close it, traveled through it thread and tighten.

Now, when the canvas is ready, we can make sind out of it. To do this, you need to link the edges of the accessory.

Useful selection of video How to tie a scarf with hands without spokes

[Total: 3. Middle: 3.3. /five] Knitting: Technique and Recommendations

Types of knitting

But there are several original techniques who will not require your professional ownership skills with special tools, because instead you can take advantage of:

  • with his own hands;
  • fingers;
  • on a wooden line;
  • Empty shoe box.

Knitting in these cases involves fairly simple techniques, and the product (most often it is a scarf) can be associated without spice, and almost half an hour, such a master class can be easily found on the video.

Hands instead of spice

Knitting today is gaining popularity, especially among craftsmen who do not know how to handle the needles. Master classes appear many. In the role of the spokes, as it is clear from the name, the hands of knitters are opposed, so their "number" turns out to be huge.

It uses either very thick yarn or ordinary, but in many additions. The set of loops and sinking of the rows occur only due to the movements of the hands. As a result, it turns out the similarity of a giant cycle knitting. This is described in more detail in the video master class.

Appliances knitting without spoke detail

  1. Rightstims must be placed on his left hand, left-handers - on the contrary.
  2. During tightening the loops, make them a little weakened, because they will need to be removed from the fingers.
  3. Choose a thread with a diameter of 3 millimeters and more. Thin slim knit in a couple of additions.
  4. When knitting on the fingers, the canvas will be in the form of a narrow tube, a width of about about the palm of the owner.
  5. Place one end of the thread from the rear of the palm, transfer the working thread through the palm, clamp your thumb. one2.
  6. Hold the thread with the right hand and twist the eight around all your fingers. 3.
  7. Wrap your little finger, make the binding to the other side. four
  8. Take revolutions around the index finger, continue to twist to the little finger. Once again, repeat the interlacing in the opposite direction to the index finger. All the penetrations with interlacing should be four. five
  9. The loops are scored. On each finger there is two loops. Try so that the loops do not confuse in height. Start with the little finger, remove the bottom loop, not shifting the upper and transfer the finger. On the other three fingers, repeat the steps with the bottom loops.
  10. Low on the back of the palm of the free end of the thread, spend between the middle and the index finger from yourself. 6.
  11. To date, on the fingers remains one loop. Repeat the interlacing from the index to the maizin and back. Then go to knitting the next row. To do this, remove the lower loops, starting with the little finger alternately move over your fingers. 7.
  12. In such a technique, continue to knit up to the necessary height. On the back of the palm will be the ready-to-wear strip.
  13. To complete the knitting, the fingers should remain on the same loop. Misinage loop with the Misinza to the Unnamed. On the nameless lower loop, remove it by turning it for the finger. Upper rolling on the middle finger. By the same scheme, come to the index finger. Move the bottom loop for the finger, one loop will remain on the index finger. Cut a thread leaving a small piece.
  14. Remove the loop from the index finger, skipped the tail through it and tighten it tight. Also fasten the end of the thread, which was at the beginning of the mating. 8

Scheme knitting without spokes

12-1.

13-1EA9B4B51

Knitting loops without spokes, stages with photos

  1. Type loops on hand. To do this, fold the thread three times, make a loop. Leave the free tail of the threads by 150 cm. Slide the loop on your hand and attract. Pour the next loop onto the second hand, pull the loop from the working thread, which is behind. Transfer the loop to another hand, attract. By such a scheme, type ten loops. 111.222.
  2. Start knit the first row. On the thumb of the right hand, put a thread and clamp. Remove the last loop from the right fist, it will turn out a new loop. Her move to the left hand. With the rest of the loops, do the same way. 333.
  3. The next row knit mirror in the opposite direction. Thus further translate from one hand to another mating until you take to the required length. 444.555.660.
  4. Loops close. In the usual way to encourage the second loop, then remove the first, leaving the second on the brush. Essay the next loop, removing the previous one. Credit the cut end of the thread through the last loop and tighten well. 777.888.999.
  5. To sew ends, align the edges. The tail of the thread must be dragged through the loops of the last two rows, making a loop. Then through the resulting loop and the loops of the edges pull a new one. Continue the same on all loops. Last tighten and hide the tip. 1000.1001.

Knitting yarn

Any yarn is used. It is advisable to choose a diameter of three millimeters. Thinner will have to be folded in several layers. There is a yarn for sale, which is called "for manual knitting." Mostly it is woolen or half-walled threads, the yarn itself is dense. When choosing yarn, take into account both the length, since the product fit quickly.

MaxResDefault

Positive sides of needlework

Knitting with hands is an affordable passion for people of any age. They can be engaged everywhere. For example, even in airplanes, where it is forbidden to apply rinse items. After all, no one can use knitting on your fingers.

Knitting on fingers

It is a fairly useful occupation with a bad mood, stress. It calms, brings pleasure and raises the mood. Also safely for small needlewomen. After all, it does not use sharp objects, such as knitting needles and hooks.

Tips for beginners

When you begin the process of knitting, do not tighten the loop tight, otherwise they will be hard to shoot. Threads can also drag the fingers that can stop the blood circulation in the joints. And your hands can numb you.

For knitting, you can use any threads (cotton or woolen), it is best to choose those with a diameter of more than three millimeters.

First, carefully examine the technique and then begin to work.

Knitting on the fingers is an interesting way of needlework for everyone: both for beginners and for experienced knitters. Let's try to do something new and unusual.

If you are ready to take up knitting with your hands with your hands, we propose to create such a fashionable and bright scarf.

How to tie a multicolored scarf

To work, you will need six sinks yarn of different colors, hook and, of course, your "skillful handles".

Start a set of looping. Put your palm on the table. Take the thread and stretch over the index, under the middle finger, then over the nameless and under the little finger. Next, skip it in the reverse order between your fingers. Repeat so again. As a result, it will turn out two loops on each finger. Now we start creating a unique masterpiece.

Knitting on fingers

knitting on the hands of a scarf

Hold the end of the thread with a thumb. Take the bottom loop that is on the Mizinz. Remove it. Credit through the top loop. That is, such actions you will let it with a loop between the little finger and Unnamed. Repeat similarly with all your fingers. Then thread stretch between average and index. Wrap the yarn around the latter and stretch over all your fingers. Make two loops. Again, starting with the little finger, remove the lower loops from all fingers. Repeat the whole process first.

Take patience, and you will have a creative awesome needlework with your own hands. Knitting should have a narrow strip of four centimeters width. Knit to the desired length. In our example, this parameter is sixty centimeters. When the band is connected, secure the loop (see above how to do it). In this way, dial five more multicolored elements.

Build a finished product

So, from each empty you associated six multi-colored stripes. Then take two blanks, which are more or less combined in color and connect them with thread.

knittingYou can use the crochet. Throw to them yarn crosswise. Then do it similarly to the rest of the workpieces. In order for us to collect the product in one canvas, you need to connect all the resulting strips with a thread.

Decoration for scarf

You can decorate the scarf with bubs. To do this, take a white thread and overtake it four fingers or use a piece of cardboard. Remove the winding from your hands and stretch the thread. Firmly tie. Cut the resulting loops. Bubon is ready! Make five more such. Place the lumps at each end of the Scharification three and the trick. You can make them monophonic or multi-colored. Rely on your taste.

needlework do it yourself knitting

What product still allows you to perform knitting on your hands?

Scarf Senud.

needlework do it yourself knitting

In order for the product to be needed:

- Motok threads;

- scissors;

- Your knobs.

Tick ​​the initial loop and put it on your right hand. Night ends Take your left hand and type six loops right. Make it as if you need the needles. Then remove the first edge with your left hand, and the rest are dialing the front stroke. Knit so up to the length you need.

Finish knitted as follows. Two loops move to the left hand. Take the nearest looting, stretch over the second and tighten. So on the left hand one loop should remain. Repeat actions until the nodes are running on the right. Leave the last loop on your left hand. Cut the thread emanating from the tangler. Tailing to grind through the remaining loop and tighten. Take the needle and in the thread. Remove the scarf. Stick the edges of the product.

needlework do it yourself knitting

Thanks to this amazing needlework, like knitting with his hands, it turned out such an unusual scarf stern. Do you weakly make such a product with your own hands without spoke and hook?

If you know how to use these tools, then knitting your hands will understand easily. Surprise yourself. Good luck in work!

Tools and materials

Alize Puffy Yarn Packaging

To the touch of the yarn of Alize Puffy soft and air, it turns out cozy products

Fluffy plush plaids without spokes and other knitting devices can be made from Turkish micropolinster yarn Alize Puffy. Material is produced in MOTKi 100 g, the length of the working thread is about 9.5 m.

The yarn looks very unusual: it is framed in the form of large loops. To create a canvas, it is enough to intertwine them in a certain order. The color range is diverse, there is a monophonic and multicolor yarn on sale. In the standard package of 5 subtilities, this amount is enough to create a children's plaid with a size of 85x85 cm.

In addition to yarn, you will need for work:

  • scissors;
  • Thick knitted hook.

Instructions for independent weaving plaid

Looping pattern

In the process of knitting the loop, the working threads are inhibited in the loop of the last pricious row of the product.

Start better from a small product. Fluffy plaid really like the kids: it is lightweight, warm, easily erased and dries quickly. The manufacture of a teddy canvase is produced in such a sequence:

  1. Lay out yarn on a flat surface, 50 loops are counted. Working thread is located on top. Weaving lead from the bottom up, in the process, the canvas do not turn over.
  2. For the plaid, a braid is most suitable - while the method of compounding the loops on the product will not be large holes. The two first loops crossed out, the latter remains on top. You do not need to adjust the tension, the threads fit quite smoothly.
  3. The free edge of the yarn stretches through the bottom loop, the next segment of the thread is carried out through the top. As a result, a dense intertwining is formed. Work continues on the proposed scheme.
  4. Having reached the edge of the measured thread, they begin to cross the yarn in the opposite direction. At the same time, the loops do the opposite: first stretch the thread through the top, and then through the bottom loop. Thus, the first row is tied as the third, the second is like fourth and so on.
  5. When the working thread is over, cut off the loop with scissors, and they come with the beginning of the next day. Bind the yarn with a small strong node, carefully cutting the edges. During operation, the nodules are filled inwards so that it is inconspicuous. Some craftsmen stitch the edges of yarn threads in tone.
  6. Having finished work, cover the loops of the last row, stretching the working thread through each. It turns out a dense neat pigtail.
  7. In order for the product to be perfectly even and beautiful, bind the edges of the border. Work is performed by a thick crochet, the hinges on the yarn are pre-cut. Another processing option is a blank strapping with a noncillaby thread loop outward. It turns out the original fringe, very decorating the product. It looks like a knitted bedspread with a contrasting sprinkler.

Video: Sample simple pattern

Fluffy teddy plaid does not need to disappear, it is enough to wash it in warm water and dry on the horizontal surface. The product is obtained lush, soft, durable, very pleasant to use.

Simple way to knit without hook and spice

For those who first encountered such a material, you can offer the simplest way to mating. Here you will not have to shove the loops, however, you need to lie straight, still need. For a start, as in the previous embodiment, the row is folded on a flat surface. All loops should be directed up.

All loops of the row should be directed upPhoto: YouTube.comAe loop rows should be directed up

The loop twisting will lead to irregularities on the front side, and it should also be considered. The second row of loops is done in the first position in which it fits. It turns out that if a series consists of (for example) five kettles, then the sixth is done in the fifth, the seventh in the fourth and further on this algorithm. No rehearse the loops, as in the previous version, will not be here.

You should not be afraid not to reach out or, on the contrary, pour loops. The mating technology itself suggests that at the end all they will fall into place, after which the stretch comes. This is good. It is ideal for working both experienced and beginner craftsmen. In this case, it is also not worth afraid of errors in the process of mating. At any time, the canvas can be dissolved, after which it defects defects. In this case, the number of similar alterations is not limited. The thread itself is no harm to them.

What will be the surface with the simplest mating

The front side of the plaid with a similar mating is quite interesting. In this case, it does not exclude in other colors. For example, you can start a mating not with one folded twice the threads, but from two having different shades. In fact, if you master several ways to knit without a hook and spice, it is quite possible to create on the surface not only the usual ornament, but also various patterns according to predetermined sketches. Today, such options will not be considered due to the fact that the review is directed mainly on beginner master-needleless. Although, why only craftsmen? Men can be performed similar work, and they make it no worse than women.

This is such a facial side with the simplest knittingPhoto: YouTube.com. This should turn out the front side with the simplest knitting.

It is worth noting that the photo shows the front side without irregularities. This can only be achieved if all the loops are located exactly. When twisting at least one of the looping, a tubercle appears on the surface. It turns out that if the master does not like a too smooth surface of the front side, you can simply twist each loop. So one way of mating is very simply turning into another.

As for the wrong side, with like knitting, as with usually using the spokes, it will look like a canvas with grooves.

The wrong side is similar to the one that is obtained when knitting

Technique Tricotin

It is more known as knitting on the fingers. It is also a knitting technique without spokes - instead of them in this case you will use your fingers. The amount of loops is limited by the number of fingers on the hand, so you will not be able to dial them more 5. Accordingly, the finished canvas is a thick cord.

In order to tie a scarf on the fingers, you must first perform a base cord with a few meters long, as in this video master class.

Video: knit fingers

As can be seen in this video, such a "necklace" looks on girls are especially elegant. They can be associated together in the form of several rings, or sew in several places, add decorative details.

Such an adult product will most likely require a greater length, and it will need to fasten a greater number of turns. Its function is more decorative: it is unlikely that it can warm well. But to emphasize the individuality of the owner - easily. The results of the work given in the master class, that confirmation.

Japanese knitting box

This is absolutely extravagant knitting of the scarf, guess the existence of which is simply impossible. In fact, it is the same knitting on your fingers, only instead of your fingers, the first row is gaining on specially cutting recesses in the box.

This method has its own advantages:

  • Scarf opens warm (hollow inside);
  • The scarf will be sufficient width, because the loops can be scored more;
  • Taking a smaller box, you can tie the thing and for the child.

The master class on the execution of the scarf without spice on the box is given in the next video. A lesson in a foreign language, but in this case we are important to the sequence of work, and it is shown here step by step.

Video: knitting on the box

Peruvian knitting - Brumstik

Manual knitting, based on the removal of loops from the template (ruler, strips of dense cardboard) and their further digestion with the help of a hook, without the use of the spokes, is called "Brumstik", or, in other words, Peruvian knitting. For this technique, some crochet skills will be required.

A chain of air loops is recruited, and with the help of the hook on this chain, the hinges are elongated around the line or template, which are currently intertwined and invested in various ways. Master classes on Brumstik are taught to encourage various patterns, but it depends on skill. If you can only knit a hook with a chain of air loops and semi-solids, then there are master classes for knitting scarves on a line with simplified receptions. For example, such as in the following videos, where the entire process is shown in very detailed.

Video: Scarf on the line

By making a set on a ruler, you need to know how much loops together you will continue to prone - the total number of them should be multiple of this number. The scarf length can be varied, removed from the line from the line already scored loops.

If you want to associate a scarf of a greater width than shown in this video master class, add the amount of intertwined strip rows. If you don't know how to beautifully tidy the finished product with a crochet, for the beginning, the scarf can be left in this form by placing only its ends - brushes or fringe.

Having mastered these simple techniques, you can improve in the scarf knitting on the line, studying other patterns. This is the difference between Peruvian knitting from other methods.

As you can see to pick up to knitters, it is not at all necessary to master master classes on working with knitting needles or study complex crochet techniques. Thick yarn, the ability to use your own hands or fingers, a ruler or a box - and already a scarf tie yourself without much difficulty.

Video: knitting on hands for beginners

Revolutionage of thumb with the help of a large wedge (Indian Wedge)

The thumb of the mittens, tangled in this way, fits well due to the anatomical location of the parts of the mittens. Indian wedge is suitable for knitting thick, fluffy threads. Wedge is symboling to the palm and therefore usually the ornament on this side does not knit.

After tieting the cuff mittens to lie several rows. Then proceed to the confusion of a large wedge. In our case, initially scored on each needle - 11 loops. The wedge accounts for 14 loops. These 14 loops will be subsequently transferred to the needles for the tight of the thumb. Therefore, for the mittens itself it will be necessary to restore 14 loops. Them and add one in 14 rows.

Wedge is formed about the middle of the palm of the mittens. To unscrew the wedge (loop add) to stick the loops of the 1st needles without changes. All loop adds will be carried out on the 2nd Spice for the right mittens. Therefore, on the 2nd needle, they insert 3 loops, and then from the 4th loop with 2 facial. The rest of the hinges on the 2nd needle in front of the facial. The loops on the 3rd and 4th needles are inserted unchanged.

Knitting wedgeLooping

The next row knit is similar. Namely hinges on the 1st, 3rd, 4th knitting knit without changes facial. And on the 2nd Spice - the first 3 loops of the facial, from the 4th loop - to raise 2 loops of the facial, the remaining loops to lie face. Add adds to 14 rows. Thus, it will be an additional 14 loops.

Revocation of the Grand Indian Wedge

Wedge loops (loops on the 1st Spice and the first 3 loops on the 2nd needle, and only 14 loops) are transferred to the pins.

Wedge wedge moved to pins

Next, knit the mobby itself, redesigning evenly hinges for 4 knitting needles on each needle.

Knitting mittens with a large wedge for thumb

To knit a finger, remove the loops from the pin and redistribute for 4 spokes. Additionally, to dial from the bargain in the junction of the finger with the mittens crossed loops. In our case, the total number of loops will be 20 - 5 loops on each needle.

Wedge loop for thumb

Knit a finger at 4 knitting just above the middle of the nail of the thumb.

Knitting anatomical thumb with the help of an Indian wedge

Close the thumb loops by uniform relevant.

Mitten with Indian WedgeMitten with a big wedge

How to knit finger on the mittens in different options with your own hands

The first option to knit a finger on the mittens.

To begin work, it is necessary to determine the average wedge line, which usually consists of several looping, depending on the thickness of the thread used and the size of the future mittens. This scheme is most popular when knitting a thumb of the mittens, as it is quite simple, and the mittens is prettier and more convenient in the sock.

This knitting method is suitable for those who knit mittens on five spokes. So, to start work, check the part of the mittens to the finger in the same diagram you used to mate the main part. Touch the mitch to the base of the thumb, on the first spoke from the beginning of the drawing, they tighten half the facial hinges, then make the scale and continue to knit face loops. All the next strip are performed by facial hinges. The third row is touched in exactly as well as the first, the fourth - as the second. To perform the fifth row, it is necessary to follow the scheme: half the band is performed by the facial hinges, the scale is made, there are three facial hinges, make the scale again and finish the mating again with facial loops. Please note that every further odd row you will add two hinges, which at the end of work and be the wedge of the thumb on the verge. By sticking the right amount of looping, which usually varies from 10 to 25, it is necessary to assemble the future finger on the pin and continue the viscous mold.

Having finished knitting the palm, go back to the thumb. Distribute the collected loops for 3 knitting needles and knit circular way until the length reaches the base of the nail. In order to close the finger, the last two loops must be signed in one. At the end of the remaining two hinges also link to one. The finger on the verges is ready, it remains only to hide the protruding thread.

The second version of the knitting of the finger on the mittens.

This option will only be suitable if you knit mittens on four knitting. So, the mitten must be knit until the bottom of the finger is reached. After that, we divide the amount of looping first to two, then three, and the resulting number of loops remove onto the pin. Next, we gain the same amount of loops on the needles that just removed. Thus, a hole is formed, which is a hole for thumb. Now you can continue to knite further by your scheme.

After you tied the mittens, we return to the thumb again. We translate the loop filmed onto the pin, back to the needle and recruit the same amount from the upper side of the hole + one loop from each side. Next, distribute the resulting amount of looping on three or four knitting needles to your taste.

Next, we knit a circular manner until the end of two rows will remain until the end of the knitting of the finger. Now in the last two rows we remove three loops, and through the remaining loops stretch the thread and tighten.

An option to knit a finger hook melt.

In order to tie a finger with a crochet, you must first leave the hole, and then knit around the columns without a nakid. As in the second option, when approximately two rows remain until the end, remove three loops in the last two rows, thread through the remaining loops thread and tighten it.

In case you knit mittens from thick yarn, you can link your finger and columns with an attachment. However, refrain from this method when using thin yarn in order to avoid the formation of holes, as the web can be less dense.

Now you know how to knit big fingers on the mittens. Using the basis this way, you can associate many similar verges that will definitely please you and warm in frosty times.

Revolutionage of thumb with a small wedge (knitting anatomical finger)

Wedge anatomical

This way of the wedge of the wedge is suitable when the thumb is touched by thin or latically threads. Such a finger is sometimes called Finger Raglan.

To confuse the thumb on 5 knitting, a small wedge is symboling, due to which the width of the mittens in the place where the thumb is located. Thus, a good fit of mittens and freedom of movement for thumb is achieved. In the photo below - the connected wedge is located on the right. This way of knitting a thumb of the mittens can be seen often on the "factory" mittens.

Description of knitting vechers

Screw to the needles (40 + 1) loop (this loop is used to close the row in the circle). Slip mittens, for example, a rubber band 2x2. Slit 2-3 rows of the intended pattern.

Cuffs Maths.

To start the formation of a wedge (expanding the mittens of the mittens for thumb) on the right vessel to stick the loops on the 1st and 2nd Spice. Then, on the 3rd needle, we make crossed nakid, 1 facial, 1 crossed nakid, the remaining loops also peel. Next to check the loops on the 4th needle.

Start knitting wedge

Check 2 circles. Then again make the addition on the 3rd needle: 1 crossed Nakid, 3 facial loops, 1 crossed Nakid. Peel two circles in the drawing. Even the addition on the 3rd needle -1 crossed nakid, 5 facial loops, 1 crossed Nakid. And again to plunge 2 circles without adding. Final addition for the wedge on the 3rd needle - 1 crossed Nakid, 7 facial loops, 1 crossed Nakid. Slit 2 circles (rows). As a result, 9 loops fall on a wedge.

Wedge of thumb

Remove these 9 wedge loops on the pin or two pins for convenience.

Wedge wedge on pin

Restore 7 loops on the 3rd needle-crossed nakid.

Set of loops

Knit further in the drawing.

Description of knitting veasions with spokes with a wedge

Tie 2 rows (circle). And then follow the recess of these scored loops for a smooth transition to the initial width of the mittens.

Description of knitting vechers

Rebeling to do through a series of two loops. That is, at the beginning of the 3rd knitting needles, they see 2 loops together, then 7 facial, 2 loops together, then knit in the drawing. Then knit the circle (row) without rejection. Reference again: 2 loops together, 5 facial, 2 loops together. The following is a circulation through a circle. We reflect until one loop from the wedge remains. Next, continue to knit a mitten in height.

Description of knitting vessels with spokes with a wedge for thumb

Scheme for tieting wedge mittens

Scan Mitten with WedgeMovement Movement Movements Methods

To confuse the finger of the loop with the pins move into two spokes. On the opposite edge, dial a hinge to other two knitting needles. Dial 1-2 loop from the gaps so that there are no holes in the canvas in the place of the thumb with the mittens. It should be as a result of 5 loops on the needle.

Knitting thumb

Knit a finger in a height of about the middle of the nail of the thumb.

knitting finger

Then make a recess on two hinges, tagging along with every edge.

Description of knitting vechers

The reinforcement of the thumb on the left vessel is carried out similarly to the touching of the finger on the right vechery with the only difference, the formation of the wedge occurs on the 4th needle.

Description of knitting vechers knitting needlesSet of loops on the left vergeMethods for knitting thumb

Sources

  • https://handmadefrom.ru/vyazanie-spitsami/svyazat_sharf_rukami.php.
  • https://luckclub.ru/vyazanie-bez-spic-i-kryuchka-petlyami-shema-pred-pryazha-dlya-pryazaniyaisaniyaisani-bez-spic
  • https://fb.ru/article/137937/vyazanie-rukami-tehnika-i-rekomendatsii-chto-takoe-vyazanie-na-paltsah
  • https://postroika.biz/23316-plyushevyy-pled-bez-spic-svoimi-rukami.html
  • https://homius.ru/Pled-iz-pljusha-bez-krjuchka-i-spic.html
  • https://moyamamma.ru/texnika_vyazaniya_varegek_palech
  • https://sdelalala-sama.ru/vyazanie-spicami/4136-kak-vyazat-pachac-na-varezhkah.html.

[Collapse]

Knit hands without spokes and hooks: 5 ideas for needlework.

Knit with your arms - a real drive for needlewomen! This is a quick result, chic tactile sensations and experience that cannot be compared with anything else. In this article we will tell about 5 products that can be knitted without spokes!

Scarf-snead knitted without spokes and hook

In the cold season, a beautiful stern is a warm and fashionable accessory. Want a new clamp with hands without spoke, and even in 1-2 hours? This master class will tell how with his hands learn how to create luxurious accessories on the neck for a short time.

For work, we need three days of threads of 100 g with a metro station 100 m in the MOTK . You can take threads and thinner, but then the threads in the canvas will be more, or to take a thread thicker, but then the clamp will not only be more comprehensive, but also harder. Although you can experiment and even need! After all, this is the pleasure of creativity.

Scarf-snead knitted without spokes and hook
Scarf-snead knitted without spokes and hook

The set of loops will be done on the right hand (for the right hand), if you are left-hand - all make a mirror. Measure about 150 cm and make a loop as in the photo (for those who know how to knit crochet is the first air loop in knitting) and wear a loop on the hand. Tighten, but so that there is no tight.

Pick out the loop on the left hand so that the working thread is closer to you, we capture the second thread on the other side and pull the loop that we dress on the right hand. Tighten the loop as well as the previous one. Next loop. A total of 10-15 loops are recommended, it depends on what kind of slander you want.

Handle
Handle

Now knit the first row. To do this, send a working thread on the right thumb and tightly clamp it in a fist. The last dialed loop is the first loop of the row, removed from the right hand and sent through the fist. The fist is spinning and get a new loop. We continue in the same vein until the end of the row.

First steps in knitting with hands without spokes and hooks
First steps in knitting with hands without spokes and hooks
Knitting of the first row
Knitting of the first row

For those who at least once took the knitting needles, the knitting process will be simple and accessible, simply instead of the spokes, imagine your hands.

Knit the last loops of the first row
Knit the last loops of the first row

At the end of knitting, all loops are on the left hand, and the working thread is near the left palm. Look at the photo. This is how the process of knitting is passed.

Knit a loop of the second row
Knit a loop of the second row

Now knit the mirror first row. In the left palm, clamp the thread, we drop the loop and pull the new one from the left hand. We dress the loop on the right hand and repeat the movement to the end of the row.

Knit the third row
Knit the third row
We continue to knit the canvas, put your hands on the table so that they do not hurt weight
We continue to knit the canvas, put your hands on the table so that they do not hurt weight

IMPORTANT: If urgently need to interrupt knitting - carefully remove knitting on the table and ask him not to touch it if you are not only in the room. Convert loops is easy, and it is practically not possible to restore order. Upon returning, put on the loop again on hand, but watch the loops do not twist.

In order for the stern to be in two turns, it should be kniting a web for about 150 cm long, while leaving a width of about 30 cm. This is important, since the canvas is elastic and you can measure when it is pulled as much as possible. Now it's time to close the product. To do this, lie two loops, after which the first loop is thrown onto the second, and lie still a loop, then again also until the end of the row. Last Loop Clean through itself and tighten.

Close loops
Close loops
Close the last loop
Close the last loop

We sew both edges of the clamp so that it turns out the ring. Sew should also with hands, connecting the first and last row. At the end - to tighten the knot, and hide the ends.

Stitching sind
Stitching sind
Refuel the tips of the threads in sind
Refuel the tips of the threads in sind

Sometimes, it's easier to assimilate knitting by browsing video lessons. We offer watching a video with a step-by-step master class of such a scarf of the Khomut knitted without spokes.

Video: Scarf - knitting only with arms without spokes and hook

Children's teddy plaid knitted without spokes and hook

For a children's blanket, we will need some alize puffy motors, a comfortable table and chair, as well as a pleasant music or a film so that knitting passed more fun. Tie the usual baby blanket from Alize Puffy yarn of 100 * 100 cm in just a couple of hours. If you decide to please yourself and your loved ones and big blanket, you can associate it in just one day off!

Color palette of yarn
Color palette of yarn

How to work with the plush yarn alize puffy, is shown in detail in the video lesson. This yarn is ready loops stitched in a factory in production. To work, measure the required amount of loops, for example 50 pieces and 51st fuel in the 50th loop, the 52nd loop fill in the 49th loop and so on to the end of the row. After, without turning knitting knit the next row.

Children's teddy plaid knitted without spokes and hook
Children's teddy plaid knitted without spokes and hook

Video: Teddy Plaid do it yourself for beginners. Knit without spokes and hook

For those who have mastered the simplest pattern of Alize Puffy yarn, tied with hands without hook and spokes one or more products, we suggest switching to the next level and master patterns with the following lesson video.

Video: 30 patterns for yarn Alize Puffy. Knitting schemes

Knitted plaid from giant yarn hands without spokes and hooks

And the next unusual associated thing in our selection is a giant yarn that has become a real hit in Instagram. It all knit everything - from the caps and snudov, to the giant plaids. But what is the most interesting - knit with hands without spokes and hooks. So, let's first decide how much such yarns do you need?

Knitted plaid from giant yarn hands without spokes and hooks
Knitted plaid from giant yarn hands without spokes and hooks
  • Children's plaid in a stroller or crib 80 * 120 cm - 2 kg of yarn will be required;
  • Plaid for the baby, the size of 100 * 150 cm - it will take 3 kg of yarn;
  • One-time plaid with a size of 140 * 190 cm - it will take 5 kg of yarn;
  • Plaid on a double bed 150 * 200 cm - 6 kg of yarn will need.

The pricing policy on this yarn is very high, so it is better to immediately decide on the size of the plaid and not to gain excess yarn.

Knitting giant yarn on hands without spokes and hooks
Knitting giant yarn on hands without spokes and hooks

So, the first row is typed identically how we gained on the sneody given above. The yarn is confused, it is problematic to dissolve it, since the fibers are tenacious. Therefore, it is better to practice on a simple yarn, and then go to a giant.

Production of yarn through the loop of the previous row
Production of yarn through the loop of the previous row

After they scored the first row - we remove the first loop, then they are tied by the facial, capturing the working loop in the palm and so until the end of the row. The last loop is in charge of the wrong. It is done simply - the thread is not from the bottom up, but on the contrary - from top to bottom and again up.

Knitting the giant yarn
Knitting the giant yarn

We close the loops simply - two hinges are tied in one, then two loops are again in one and so to the end of the row. Last loop tighten firmly.

For maximum convenience, give a video lesson how to properly knit the giant yarn from the best European masters.

Video: Making A Giant Arm-Knitted Blanket

How to tie a pillow knot without spokes and hooks?

We will continue the topic of home comfort and now we will now talk about how to tie a pillow without spice and hook.

Yarn Ohhio Braid.
Yarn Ohhio Braid.

So, the yarn of Ohhio Braid will need, and if there is no knitness, a foil tube, a holofiber and a little time. The essence of the yarn is that it consists of a dense elastic hollow tube filled with a hollowberry. If you do not have the opportunity to buy in your city the desired color - create it yourself.

How to make such a yarn in detail is shown in the video lesson.

Video: Pillow-knot do it yourself, detailed master class. 2 ways to tie nodal pillows

Now go to a detailed node tying process. To do this, lay out the yarn on the free table and bind the node according to the scheme.

Pillow diagram node
Pillow diagram node

The beginning and end of the node tighten so that the pillow is tightly tight. Hands correct all the irregularities and stitch the tone of the fabric beginning and end of the yarn around the perimeter of the pipe. Hide the stitched place among the folds of the pillow.

Pillow knot
Pillow knot

Do you like this job? Do you want to still tie a couple of pillows from this yarn? We offer to see two video lessons from manufacturers of this yarn.

Video: Ohhio Braid yarn pillow

Video: Ohhio Braid yarn pillow

How to tie a lace without spokes and hook?

Another gorgeous passion for those who have yarn stocks - knitting without spokes and hooks on your fingers! Thanks to this technique, a lot of things can be associated, but the simplest option is the lace. From him and let's start.

  • So, today there is a flat wide lace in fashion - such and we will knit. We make a chain of air loops depending on the desired lace width, and the length of the finger, of course. It can be from 3 to 15 loops.
  • Next, we seem to the marigold and take a loop as in the photo. The loops we ride on the right index finger. The loops should be free and easy to play on the fingers. As soon as the row is over, we subverect the thread and stretch through all the loops to the left for the right.
  • Now repeat the procedure for pulling the loops from the previous row. Such a lace is obtained dense and not very elastic. Knitting resembles a Tunisian way.
Knitting on fingers
Knitting on fingers

The lark ends simply - stretches from left to right, the extreme loop is captured and delayed with the working thread into the node. And in conclusion, we propose to watch the video, how to knit from the giant plush yarn.

Video: Plaid from the giant plush yarn Big City Yarn

We are all craftswomen. And from nothing we can create a beauty that conquered the hearts of men. Knitting soothes, it allows you to focus on the process itself. Let's try?

Tie a scarf without spice. You need only 30 minutes

Knit with arms without spokes and hook For beginners, even easier than knitting using the tool. Having learned once the algorithm, you can knit even with closed eyes or under the table at work. We will connect with you a warm and such a fashionable scarf.

Yarn. For knitting with hands without spokes and hook, you can use any yarn. From thick and fluffy yarn products are obtained volumetric, and from thin - fantastically openwork.

Scarf - Homut

We will need:

3 Mokea yarn thickness 100 m Weight 100 g. Composition Select in your wishes. Wool or blended yarn and acrylic will save from the cold.

The dimensions of the finished scarf -150 cm in length, about 30 cm in width

Tie a scarf without spice. You need only 30 minutes

Begin. We look at the illustration, repeat.

Set of hinges: knitting with hands without spokes and hooks also begins with a set of loops, right on the right hand. Take the thread from 3 subtilities and make the first loop at a distance of about 1.5 m from the end. Put the loop on the right hand and tighten. Take the tail on the left hand from the bottom up, take the left hand left behind, working thread and pull out the loop. Put the new loop on the right hand and tighten. Make 10 loops.

Tie a scarf without spice. You need only 30 minutes

First row: Put the working thread on the thumb right hand, squeeze the fist. Extreme loop with wrists roll from a fist. The right hand will be a new loop, put it on your left hand and continue in the same vein with all the others.

Tie a scarf without spice. You need only 30 minutes

The second row knit in the mirror reflection. Continue to knit with the right to the left and left to the right until you finish. Leave about 4 meters of yarn for the last row.

Tie a scarf without spice. You need only 30 minutes
Tie a scarf without spice. You need only 30 minutes

If you need to postpone the knitting with your arms without spokes and hook, just remove it with your hands. Putting on knitting back, make sure the loops did not twist.

Last row: Check 2 loops as usual, then just remove the first with your hands, leaving the second on the wrist. Check more 1, remove the previous one. When the last loop remains, take the end of the working thread, thread into it and tighten.

Tie a scarf without spice. You need only 30 minutes

Sisting the ends of the scarf: Align the edges, pull out the loop of the threads through the loop of the two extreme rows, the next pull the edges and the working loop through the loops. At the end Tighten the loop, hide the end.

Tie a scarf without spice. You need only 30 minutes

We dress in a cafe on a cup of coffee with a friend!

https://www.podskagi.info.

https://t.me/podskagi.

Manual knitting, unlike machine, today is represented by various technicians, and not all of them are limited to spokes or crochet. Among alternative ways, for example, work on a special fork or on a template.

Types of knitting

But there are several original techniques who will not require your professional ownership skills with special tools, because instead you can take advantage of:

  • with his own hands;
  • fingers;
  • on a wooden line;
  • Empty shoe box.

Knitting in these cases involves fairly simple techniques, and the product (most often it is a scarf) can be associated without spice, and almost half an hour, such a master class can be easily found on the video.

Hands instead of spice

Knitting today is gaining popularity, especially among craftsmen who do not know how to handle the needles. Master classes appear many. In the role of the spokes, as it is clear from the name, the hands of knitters are opposed, so their "number" turns out to be huge.

It uses either very thick yarn or ordinary, but in many additions. The set of loops and sinking of the rows occur only due to the movements of the hands. As a result, it turns out the similarity of a giant cycle knitting. This is described in more detail in the video master class.

Video: Scarf do it yourself

Thus, it is possible to perform various scarves, sinks, clamps. These are bulk warm things, bind which, and absolutely no needles, can be literally for 30-40 minutes. Original, fashionable and unusual things will allocate their owners from the crowd. And to tie them, as clear from the video, will not be no difficulty. Even if you have to interrupt the work (for example, it is necessary to move away somewhere), such a knitting with hands allows you to transplanted the cloth from your hand, for example, on a plastic bottle, and returning to continue again.

Technique Tricotin

It is more known as knitting on the fingers. It is also a knitting technique without spokes - instead of them in this case you will use your fingers. The amount of loops is limited by the number of fingers on the hand, so you will not be able to dial them more 5. Accordingly, the finished canvas is a thick cord.

In order to tie a scarf on the fingers, you must first perform a base cord with a few meters long, as in this video master class.

Video: knit fingers

As can be seen in this video, such a "necklace" looks on girls are especially elegant. They can be associated together in the form of several rings, or sew in several places, add decorative details.

Such an adult product will most likely require a greater length, and it will need to fasten a greater number of turns. Its function is more decorative: it is unlikely that it can warm well. But to emphasize the individuality of the owner - easily. The results of the work given in the master class, that confirmation.

Japanese knitting box

This is absolutely extravagant knitting of the scarf, guess the existence of which is simply impossible. In fact, it is the same knitting on your fingers, only instead of your fingers, the first row is gaining on specially cutting recesses in the box.

This method has its own advantages:

  • Scarf opens warm (hollow inside);
  • The scarf will be sufficient width, because the loops can be scored more;
  • Taking a smaller box, you can tie the thing and for the child.

The master class on the execution of the scarf without spice on the box is given in the next video. A lesson in a foreign language, but in this case we are important to the sequence of work, and it is shown here step by step.

Video: knitting on the box

Peruvian knitting - Brumstik

Manual knitting, based on the removal of loops from the template (ruler, strips of dense cardboard) and their further digestion with the help of a hook, without the use of the spokes, is called "Brumstik", or, in other words, Peruvian knitting. For this technique, some crochet skills will be required.

A chain of air loops is recruited, and with the help of the hook on this chain, the hinges are elongated around the line or template, which are currently intertwined and invested in various ways. Master classes on Brumstik are taught to encourage various patterns, but it depends on skill. If you can only knit a hook with a chain of air loops and semi-solids, then there are master classes for knitting scarves on a line with simplified receptions. For example, such as in the following videos, where the entire process is shown in very detailed.

Video: Scarf on the line

By making a set on a ruler, you need to know how much loops together you will continue to prone - the total number of them should be multiple of this number. The scarf length can be varied, removed from the line from the line already scored loops.

If you want to associate a scarf of a greater width than shown in this video master class, add the amount of intertwined strip rows. If you don't know how to beautifully tidy the finished product with a crochet, for the beginning, the scarf can be left in this form by placing only its ends - brushes or fringe.

Having mastered these simple techniques, you can improve in the scarf knitting on the line, studying other patterns. This is the difference between Peruvian knitting from other methods.

As you can see to pick up to knitters, it is not at all necessary to master master classes on working with knitting needles or study complex crochet techniques. Thick yarn, the ability to use your own hands or fingers, a ruler or a box - and already a scarf tie yourself without much difficulty.

Video: knitting on hands for beginners

Leave a Reply