As Windows 7 reset to factory settings

MiniatureIt happens that Windows 7 begins to function with errors. There are many possible reasons for this, for example, infecting viruses or a fault of component components, as well as damage to system files. At the same time, the PC is often rebooted or even worse not at all loads. In this situation, there is a significant risk of loss of important data that were saved in the computer.

Windows 7 recovery methods

Fortunately, we have the ability to roll back Windows 7 and make a reset to the factory settings. To this end, you can use the following ways:

  1. Take advantage of the boot disk;
  2. Use the "system restoration";
  3. Run the boot with the previous working version of the system.

How to fix the OS using a boot disk?

With the use of a disc, we can reset the settings to the factory or make the windows rollback and return the computer performance. This requires to boot in safe mode and log in "Troubleshooting Computer" , then install a CD in CD-ROM. A menu appears in which you want to click "OS Recovery" .

Restoring the system with a diskNext, Windows recommends the following options:

  1. System memory analysis;
  2. Windows restoration;
  3. Fixing system startup;
  4. Execution of work on the command line;
  5. Restore from the image of Windows.

System recovery parametersSelect the option specified in the screenshot above, then the procedure is similar to those described in the section below.

How to use "Windows Recovery"?

WINDOVS creates points in case of fixing requirements, as well as the user can create them independently and determine the save time. During the creation of a user of such a point, you must disable all applications. Next to enter B. "Control Panel" "System" . Then enter the window "System Protection" and click "Creating a recovery point" (you need to come up with and print her name). A notification will appear - the "recovery point is successful".

The recovery point has been successfully createdTo correct Windows Press "Start" , enter "Control Panel" and further B. "Restore - launch system recovery" . In the menu that appears, click on the point (it is recommended to choose a point a few days before the formation of errors).

Restoring a computer from the imageNext will be rebooted.

Also in this window, it is possible to reset the settings and rollback of the OS using a pre-created image that is recorded in advance to disk or other external media. Flash drives are currently popular. It is recommended to use default settings.

How to download with the previous working version of the system?

This method is the easiest refund to the successful configuration. You need to download in "Safe mode" . To this end, when it is started, you must click the button. "F8" and press "Last successful configuration" . Next will be returned to the working version.

Run in safe modeUsing a rollback to the working version, it is possible to correct errors when installing software to a computer. Repair files that damaged viruses. This method is effective and convenient in case of not very serious mistakes, in other cases it will not help and requires the use of more efficient methods.

How to make a complete reset to the factory settings

When unsuccessful use of the above three ways, it is possible to reset to factory settings. With this purpose, computers are equipped with a section with the factory execution. This section has the status of "system" and is usually not visible to the user.

System disk with factory OSThere are special programs for resetting and roll back to factory. In order to use the utility, you need to press a special button provided by the PC developer. The menu will open where you want to click "Restore to the state at the time of purchase" . Next, everything will happen without the user's participation and after rebooting it only needs to be created by creating a new account.

Running the OS Recovery Wizard utility

It should be noted that the data in the computer's memory will be eased. It is recommended to pre-move the necessary information to an external hard drive.

Reset Windows 7 to factory settings

There are several methods for resetting Windows parameters to the factory state. First of all, you should decide exactly how you want to reset: Return the original settings of only the operating system, or, in addition, to completely clean the computer from all installed programs. In the latter case, a complete deletion of all data from the PC will occur.

Video instruction

Method 1: "Control Panel"

Windows parameters reset can be done by running the tool required for this procedure "Control Panel" . Before activating this process, be sure to back up the system.

  1. Click "Start" . Go to "Control Panel" .
  2. Go to the control panel through the Start button in Windows 7

  3. In block "System and safety" Choose an option "Computer archiving" .
  4. Switch to the computer archiving window in the control panel in Windows 7

  5. In the window that appears, choose the lowest point "Restore system parameters" .
  6. Go to the Restore System Settings window or computer from the archiving of the computer data in the Control Panel in Windows 7

  7. Next, go to the inscription "Extended recovery methods" .
  8. Transition to advanced recovery methods in the daring window in the control panel in Windows 7

  9. A window contains two parameters:
    • "Use the system image" ;
    • "Reinstall Windows" or "Return a computer to a status specified by the manufacturer" .

    Start reinstalling the operating system in the Advanced Recovery Methods in the Control Panel in Windows 7

    Choose the last item. As you see, it can have a different name on different PCs, depending on the parameters given by the computer manufacturer. If you are displayed name "Return a computer to a status specified by the manufacturer" (most often this option is at laptops), then you just need to click on this inscription. If the user sees the item "Reinstall Windows" , Before pressing it, you need to insert the installation disk of the OS. It is worth noting that it should be exclusively the instance of Windows that is currently installed on the computer.

  10. Whatever the name of the above point was not, after clicking on it, the computer is restarted and the system restores the factory settings. Do not be afraid if the PC will reboot several times. After the specified process is completed, the system parameters will be reset to initially, and all installed programs will be deleted. But the previous settings, if you wish, you can still return, since the files deleted from the system will be transferred to a separate folder.

Method 2: Recovery Point

The second method involves using the system recovery point. In this case, only system settings will be changed, and downloaded files and programs will remain in immunity. But the main problem is that if you want to reset the parameters to the factory settings, then to do this, you need to create a recovery point immediately as soon as you purchased a laptop or installed OS on a PC. And this is done not all users.

  1. So, if there is a recovery point created before using the computer, then go in the menu "Start" . Choose "All programs" .
  2. Log in to all programs using the Start button in Windows 7

  3. Next go to the catalog "Standard" .
  4. Log in to the Standard Catalog using the Start menu in Windows 7

  5. Go to the folder "Service" .
  6. Log in to the Catalog Service using the Start menu in Windows 7

  7. In the directory appeared, look for a position "System Restore" And click on it.
  8. Run Utility System Restore in Utilities Catalog Using the Start menu in Windows 7

  9. The selected system utility is launched. OS recovery window opens. Here just click "Further" .
  10. Restoring system files and parameters in Windows 7

  11. Then opens a list of recovery points. Be sure to install a tick near the item "Show other recovery points" . If there is no one option, and you do not know which one to choose, although it is firmly confident that we created a point with factory settings, then in this case, choose the earliest by the date item. Its value is displayed in the column. "Date and time" . Highlight the appropriate item, press "Further" .
  12. Select the recovery point in the Restore system file and parameters in Windows 7

  13. In the next window, you can only confirm that you want to roll back the OS to the selected recovery point. If there is confidence in your actions, then press "Ready" .
  14. Confirmation of running system rollback to recovery point in the Restore system files and parameters in Windows 7

  15. After that, the system is rebooted. Perhaps it will occur several times. After completing the procedure, you will receive a functioning OS on the computer with factory settings.

As you can see, there are two options to reset the state of the operating system to the factory settings: by reinstalling the OS and return parameters to the previously created recovery point. In the first case, all installed programs will be removed, and in the second - only system parameters changed. What exactly from the methods to use depends on a number of reasons. For example, if you did not create a recovery point immediately after installing the OS, then you have only the option that has been described in the first method of this manual. In addition, if you wish to clean the computer from viruses, then only this method will be suitable. If the user does not want to re-install all the programs that are available on the PC, then you need to act in the second way.

CloseWe are glad that you could help you solve the problem. Close

Describe what you did not work. Our specialists will try to answer as quickly as possible.

Will this article help you?

WELL NO

Share Articles on Social Networks:

How to reset Windows 7 to factory settings

There are several methods for resetting Windows parameters to the factory state. First of all, you should decide exactly how you want to reset: Return the original settings of only the operating system, or, in addition, to completely clean the computer from all installed programs. In the latter case, a complete deletion of all data from the PC will occur.

How to reset Windows 7 to factory settings

Content : How to reset Windows 7 to factory settings

  1. Method 1: "Control Panel"
  2. Method 2: Recovery Point

Method 1: "Control Panel"

Reset Windows parameters can be done by running the tool required for this procedure through " Control Panel " Before activating this process necessarily Make a backup system .

1. Click " Start " Go to " Control Panel "

Control Panel

2. In the block " system and safety »Choose the option" Archiving computer data "

Archiving computer data

3. In the window that appears, select the lowest item " Restore system parameters "

Restore system parameters

4. Next, go to the inscription " Extended recovery methods "

Extended recovery methods

5. A window contains two parameters:

  • «Use the system image ";
  • «Reinstall Windows " or " Return the computer to the status specified by the manufacturer "

Return the computer to the status specified by the manufacturer

Choose the last item. As you see, it can have a different name on different PCs, depending on the parameters given by the computer manufacturer. If you displays the name " Return the computer to the status specified by the manufacturer "(Most often this option is like laptops), then you just need to click on this inscription. If the user sees the item " Reinstall Windows ", Then before pressing it, you need to insert the installation disk of the OS into the drive. It is worth noting that it should be exclusively the instance of Windows that is currently installed on the computer.

6. Whatever the name of the above point was not, after clicking on it, the computer is restarted and the system restores the factory settings. Do not be afraid if the PC will reboot several times. After the specified process is completed, the system parameters will be reset to initially, and all installed programs will be deleted. But the previous settings, if you wish, you can still return, since the files deleted from the system will be transferred to a separate folder.

Method 2: Recovery Point

The second method involves using the system recovery point. In this case, only system settings will be changed, and downloaded files and programs will remain in immunity. But the main problem is that if you wish to reset the parameters to the factory settings, then to do it, you need Create a recovery point Immediately, as soon as you purchased a laptop or installed OS on a PC. And this is done not all users.

1. So, if there is a recovery point created before using the computer, then enter the menu " Start " Choose " All programs "

Point of recovery

2. Next, go to the catalog " Standard "

Standard

3. Go to the folder " Service "

Service

4. In the directory that appears, look for the position " System Restore "And click on it.

System Restore

5. Running the selected system utility. OS recovery window opens. Just press " Further "

Further

6. Then opens a list of recovery points. Be sure to install a tick around the item " Show other recovery points " If there is no one option, and you do not know which one to choose, although it is firmly confident that we created a point with factory settings, then in this case, choose the earliest by the date item. Its value is displayed in the column " date and time " Highlight the appropriate point, press " Further "

Show other recovery points

7. In the next window, you can only confirm that you want to roll back the OS to the selected recovery point. If there is confidence in your actions, then press " Ready "

Ready

8. After that, the system is restarted. Perhaps it will occur several times. After completing the procedure, you will receive a functioning OS on the computer with factory settings.

As you can see, there are two options to reset the state of the operating system to the factory settings: by reinstalling the OS and return parameters to the previously created recovery point. In the first case, all installed programs will be removed, and in the second - only system parameters changed. What exactly from the methods to use depends on a number of reasons. For example, if you did not create a recovery point immediately after installing the OS, then you have only the option that has been described in the first method of this manual. In addition, if you wish to clean the computer from viruses, then only this method will be suitable. If the user does not want to re-install all the programs that are available on the PC, then you need to act in the second way.

If your computer's manufacturer saved Windows 7 installation data on it, you must act as follows: Open the control panel and go to the "System and Security" category.

Win7res1In the "Archiving and Recovery" section, find the "Restore system parameters or Computer" item. Click on "Advanced Recovery Methods", select the "Computer Return to Initial Settings" option and follow the instructions.

Win7res2.However, if you encounter the "Reinstall Windows (Windows installation disk) option, you need to reset Windows 7 using recovery methods.

Win7res3.After starting the computer, during the boot process, pay attention to the indication at the bottom of the screen that by pressing the function key you can go to the recovery mode. In most cases, these buttons are [F11] or [F9], otherwise other function keys should be tasted.

On some laptops for accessing the function keys, you must press the [FN] key in the lower left corner of the keyboard. If you did not have time to click on the desired key, you need to repeat the boot process.

After your computer boot in recovery mode, use the arrow keys to select the Restore Point. Since you have already saved the data, you can go to the next step by clicking "Next".

Now Windows will prompt you to disable all input devices, such as the keyboard and mouse. After confirmation with the "Next" button, turn off the peripheral devices. The reset process begins, which may take a few minutes.

Photo: Company-producer

Reset Windows 7 to factory settings can be performed through the installation of the installation drive or by pre-installed in the operating system (OS) tools. Each method is characterized by an execution algorithm and efficiency, but ultimately gives the desired result.

Rollback of Windows 7 to the factory settings

Reset the personal computer (PC) to the factory settings in Windows 7, through a special option in parameters. At the same time, the user will lose all the data on the C. disk.

Step-by-step guide:

  1. To uncover " Start ", go to " Control Panel "

Control Panel

  1. Setting the display mode of the elements " Category ", Click on item" Archiving computer data "

Computer data archiving

  1. Press the hyperlink Restore system parameters or computer "

Restore system parameters or computer

  1. Click on the line " Extended recovery methods "

Extended recovery methods

  1. Select the option " Reinstall Windows "

How to reset the computer to the factory settings in Windows 7

Next, the system will ask to insert a disk with the distribution installer to continue the operation. The rollback process will start, after which all settings return to the initial state.

Important! When using a laptop at the last stage of the instruction, you will need to select " Return the computer to the status specified by the manufacturer "To return the system parameters to the original.

If you reset the computer and lead to the initial state, all programs on the computer are deleted. But a special catalog with lost data will be created, which can be restored.

Using control points

You can roll back Windows 7 with a boot disk - using test points to be created during the operation of the computer. Otherwise, this method will not be able to use.

Step-by-step guide:

  1. Enter the menu " Start ", Go to the catalog" All programs "

Go to the "All Programs" section

  1. Reveal the folder " Standard ", Then go to the directory" Service "

Standard

  1. Click on the utility " System Recovery "

System Restore

  1. A program window will start, in which you need to click on the title screen. Further .

Next in restoring the system

  1. In the checkpoint list, select the necessary, focusing on the creation date and brief description. Click Further .

Select the control point for rollback

  1. Run the recovery process by pressing the button Ready .

Running the recovery process

During the operation, the computer can restart several times. After completing all the parameters roll back. The system will be ready for use when the desktop appears on the screen.

Recovery using the boot flash drive

If the PC is not started and the previous methods cannot be used, you must make a boot drive and drop the OS installer files there. The rollback process begins from the moment when the computer starts from the BIOS flash drive.

Important! When creating an installation disk, a flash drive must be cleaned, so it is advised to transfer important files to another media.

Step-by-step guide:

  1. Select the interface language, time format and the layout used, click Further . Input data does not affect further actions.

Selecting the language of the installer

  1. Go over the hyperlink " System Restore "

Link "Restoration System"

  1. When the menu appears to select " System Restore "

Switch to the "Restore System" menu

A window will appear Masters in which you need to select a checkpoint to produce rollback. Further actions are similar to those described earlier in the article.

Note! In the menu of the installation flash drive, you can select the item " Restoring the image image "But to make a return to the initial state, you must have a disk with a pre-created backup.

Conclusion

To reset the PC settings, it is not necessary to remove the system completely. Inexperienced users are recommended for fulfilling the first method mentioned in the article, which is more effective on laptops. Otherwise, you need to use the recovery point, if any. The use of the loading flash drive is effectively when there is no access to the desktop OS.

Sooner or later, it may be time when the Windows 7 operating system starts to work incorrectly, and even no longer stop loading, despite the absence of hardware faults of the computer. It is better to prepare for this event in advance so as not to lose user data and applications on the system disk, resorting to a complete reinstalling system. Consider how to reset Windows 7 to factory settings and restore system performance in 4 ways.

Rollback to the recovery point

Recovery points, also called shadow copies, are backups of critical system and software files, including configuration, as well as registry branches. They are created in automatic mode when making significant changes in Windows, for example, when installing drivers, and stored in a specially hidden folder of the System Volume Information, located at the root of the system directory, access to which is also limited to the computer administrator.

System Volume Information Form Information Catalog 7

If Windows 7 began to work incorrectly, you can roll back to the recovery point, but it is desirable that it is created immediately after installing the system.

To roll back Windows 7 to the recovery point, in the window RUN. WIN. + RFollow the command Rstrui. And follow the simple instructions of the step by step wizard by choosing your recovery point.

If Windows is damaged so much that it cannot boot yourself, try you first download the system in safe mode (pressing F8. When you turn on the PC), and in case of failure, load it from the installation disk, and when the Master Installer window appears on the screen, click Shift. + F10 . This will open the standard command line in which you need to perform a familiar command. Rstrui. By calling the wizard to roll back to the previous recovery point.

Further actions are practically no different from those described above, so after completing the recovery procedure, you will only restart the computer as usual. However, it should be understood that such a recovery is not a discharge to the "factory" state in the full sense of the word, the system will be restored only in part, and all the programs you have installed for a small exception will not be affected.

Reset by reinstalling

The second version of the Windows 7 reset is more rigid, in fact it is equal to the complete reinstalling system with the only difference that in the process of such a recovery in the root of the system disk, a WindowsOld folder is created, containing a significant part of the old system. Also, a prerequisite for resetting to the original settings of Windows 7 is the presence of the user of the installation disk of this version of the operating system. If the system is still capable of loading, open through the window WIN. + RTeam

Control / Name Microsoft.Backupandrestore 

window " Archiving and recovery "And click the link" Restore system parameters or computer ", And then the link" Advanced recovery parameters "

You will receive two options for recovery to choose from - using the system image and using the installation disk. If you do not take care of creating a full backup in advance, choose the second way, click " Yes »In the recovery window and choose whether to archive the user files stored in the profile directories to the outer disk or flash drive or not. If yes, the wizard will propose to specify a place to save the files, if not, just press " Skip "And run a reboot of the computer.

When the computer is loaded, follow the instructions of the step-by-step wizard, without forgetting in advance insert the installation image in advance, from which Windows 7 will take the necessary files. In BIOS, you do not need to be downloaded from the disk in this example. Further actions, up to the creation of the user, are no different from the actions during the classical installation of the OS, except that, when the system is first loaded, the system will offer to restore your user files from the archive if you worked it out to create, read the previous paragraph.

Restoration from the image

Compared to reinstalling, recovery from the image has a significant advantage, since it contains not only system files, but all the programs installed in it. As in the case of recovery points, it is advisable to create such a backup immediately after installing and primary Windows setup or a PC purchase with a pre-installed system. Called such an image WindowsImageBackup. And it can be stored both on the second physical disk and in the root of the user volume.

Within the framework of this article, we will not affect the creation of the image, we note only that you can create it both by the means of Windows itself and the means of third-party programs. Suppose he already has it, as well as the recovery disk that Windows 7 offers to write immediately after creating a system backup. If there is no recovery disk, then download the computer from the usual installation disk, press " System Restore ", And when the window appears on the screen Recovery Parameters ... ", Select the option" Computer recovery using the system created previously "

Choose your backup in the wizard window that opens (you can also manually choose) and follow the instructions that are usually reduced to the request to press the button " Further ", And then" Ready ", After which the image deployment procedure will begin. Wait for it to complete, and you will get a fully restored system with all the settings.

Reset to factory settings

As for the Windows Reset to the factory settings or otherwise, Factory Reset, it should be noted one important detail. The methods described above are essentially not a reset, since it is not available on all computers, but only on those on which the manufacturer considers it necessary. On the disks of such PC there is a special service section Recovery. With the most "factory" system with original drivers.

Open the command diskmgmt.msc. Through the window WIN. + R «Disc management "And look if you have such a partition.

Section Recovery on computer disk

Additionally, on some laptops and computers, the manufacturer integrates in a BIOS or WinPE recovery environment, or a special utility. In Acer, for example, it is called Acer Recovery Management. and caused by repeatedly pressing F10 With hesitated Alt. followed by entering the password 000000. ; In HP it is name HP Recovery Manager. And caused by clicking F11 when rebooting a computer; In Lenovo, this provides a special hardware button. More information about the procedure can be read either in the instructions attached to the computer or on the manufacturer's website.

HP Recovery Manager.

The reset procedure itself does not constitute a special complexity, being represented by several stages accompanied by the wizard prompts. There is a universal way to run a reset utility: if there is a Recovery section on a disk in the advanced recovery methods instead of " Reinstall Windows »You will have the option" Return the computer to the original condition specified by the manufacturer "Or something like that. It can be accessed from under the boot disk in the recovery environment, as shown in the screenshot.

For the future: if the section Recovery is not

The special partition from the original OS is not available on all computers. What if you do not have it? It is best to create a complete backup of the configured system with a built-in or third-party tool and save it if not on a separate physical disk, which is preferable, then on the user section. When something happens to your Windows, you can always deploy the created image. Well, and if you consider yourself an advanced user, you can try to create a special section of Recovery on your PC independently, finding a specific image of the Recovery section on the Internet, but warning in advance that this procedure is quite time-consuming, and not the fact that everything after that It will work correctly.

Leave a Reply